Claremont, CA 91711 • Pomona Valley / Eastern Los Angeles County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Claremont, CA
Light-gauge steel and metal stud framing in Claremont — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Village shops on Indian Hill and Harvard, Foothill Boulevard interiors, college-adjacent offices, and house remodels. A Village TI and a Pomona mailing address are not the same city hall.
Claremont Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Claremont storefront. This page is steel / metal stud framing in Claremont, CA 91711 — Indian Hill Boulevard, Harvard Avenue, Yale Avenue, Foothill Boulevard, Towne Avenue, Arrow Highway, and Base Line Road.
Text “Claremont” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Claremont
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 91711. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, and office build-outs in The Village and along Indian Hill Boulevard. If the drawing says steel studs, that is the bid. Commercial framing →
College-adjacent and office interiors
Suite partitions, conference rooms, and rated walls near the Claremont Colleges, Foothill offices, and civic blocks around Harvard Avenue.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Remodel and ADU partitions
New interior steel walls inside an existing Claremont house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Claremont Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Village TI, Indian Hill shops, Foothill offices, college-adjacent suites, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or building structure that hold the roof up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, campus-adjacent offices, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Claremont house walls in the College Streets, north of Foothill, and Padua Hills with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or block walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
The Village vs Foothill vs the Colleges
Claremont is an incorporated Pomona Valley city — ZIP 91711 — at the east end of Los Angeles County, against Upland and Montclair in San Bernardino County and against Pomona and La Verne in Los Angeles County. It is not Pomona. Portions of 91711 also touch Pomona, so a Claremont mailing address can still sit in the wrong city. Permits inside city limits run through the City of Claremont Building Division at 207 Harvard Avenue. Village work often also goes through Architectural Commission review. Text the street so we bid the right desk.
The Village is the walkable downtown south of the Metrolink tracks — Indian Hill Boulevard, Harvard Avenue, Yale Avenue, Bonita Avenue, and Second Street. The Claremont Colleges sit just north of those tracks and south of Foothill Boulevard. Foothill is old Route 66 and the city’s east-west retail spine. Towne Avenue, Arrow Highway, and Base Line Road pick up more corridor and north-side traffic. Houses south of Foothill are flatter college-town stock; north toward Padua Hills the lots climb.
The usual mismatch is treating a Village tenant wall like a bedroom 2×4 — or hanging a Level 5 restaurant finish on house framing that only needed wood hang-only. Interior metal studs do not hold a campus building up. Occupied houses, open shops, and after-hours offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Claremont Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Claremont, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, campus-adjacent suite, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Claremont, CA
This page is steel and metal stud framing in Claremont — ZIP 91711, an incorporated Pomona Valley city, from our Fairfield shop. Permits inside city limits run through the City of Claremont, not Pomona, Upland, La Verne, or Montclair. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Claremont address. No structural steel building. No promise that metal studs hold a campus hall up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. This page is Claremont — not Pomona, Upland, La Verne, or Montclair.
Claremont Metal Stud FAQs
Do you do steel / metal stud framing in Claremont?
Yes. Interior light-gauge metal stud framing in Claremont, CA 91711 from our Fairfield shop — partitions, Village TI walls, college-adjacent interiors, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Claremont the same as Pomona or Upland?
No. Claremont is its own incorporated city. Pomona and La Verne are Los Angeles County cities. Upland and Montclair are San Bernardino County. ZIP 91711 can also touch Pomona — text the street so we bid the right city hall.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and building structure that hold the roof up are a different contractor.
Do Claremont houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Village TIs, college-adjacent offices, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop in The Village or on Foothill?
Yes. Occupied retail and restaurant TIs on Indian Hill Boulevard, Harvard Avenue, and Foothill Boulevard are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Claremont buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open Village shop, or an after-hours office. A full TI is still a construction job — plan rooms.
Do you work Indian Hill, Harvard, Foothill, and Towne?
Yes. Indian Hill Boulevard, Harvard Avenue, Yale Avenue, Foothill Boulevard, Towne Avenue, Arrow Highway, and Base Line Road are on the same framing page. Text the street with the photos.
How much does metal stud framing cost in Claremont?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Claremont Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099