Chatsworth, CA 91311 • Northwest San Fernando Valley • City of Los Angeles • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Chatsworth, CA
Light-gauge steel and metal stud framing in Chatsworth — interior partitions, industrial and office tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Devonshire Street shops, Topanga and De Soto suites, station-area interiors, and house remodels. A Chatsworth mailing label and a Canoga Park or Northridge job are not the same permit desk.
Chatsworth Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Chatsworth storefront. This page is steel / metal stud framing in Chatsworth, CA 91311 — Devonshire Street, Topanga Canyon Boulevard, De Soto Avenue, Mason Avenue, Chatsworth Street, Lassen Street, Plummer Street, and Canoga Avenue.
Text “Chatsworth” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Chatsworth
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 91311. This is the skeleton the board hangs on.
Tenant improvement framing
Office, warehouse, and shop build-outs on Devonshire, Topanga Canyon Boulevard, De Soto, and Mason. If the drawing says steel studs, that is the bid. Commercial framing →
Industrial and flex-suite interiors
Warehouse offices, mezzanine rooms, restroom cores, and rated demising walls in Chatsworth industrial parks — not a structural steel building bid.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Remodel and ADU partitions
New interior steel walls inside an existing Chatsworth house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Chatsworth Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Devonshire TI, Topanga and De Soto offices, industrial suite walls, rated commercial partitions, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or building structure that hold the roof up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, warehouse abuse, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, industrial offices, restaurant TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Chatsworth house walls east of Topanga and in the tract streets off Lassen and Plummer with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Tilt-up or block warehouse walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Devonshire vs Topanga vs the Hills
Chatsworth is a northwest San Fernando Valley neighborhood in the City of Los Angeles — ZIP 91311 (91313 is a P.O. box). It sits against the Santa Susana Mountains and Simi Hills, with Porter Ranch and Northridge to the east, Canoga Park, Winnetka, and West Hills to the south, and unincorporated Los Angeles County plus Ventura County / Simi Valley to the west. It is not its own city hall. A Chatsworth mailing address can still sit next to a Canoga Park or Northridge job. Permits inside city limits run through the Los Angeles Department of Building and Safety. Valley plan check and permits are handled at the Van Nuys Development Services Center, 6262 Van Nuys Boulevard, 2nd Floor, Room 251, Van Nuys, CA 91401. Text the street so we bid the right desk.
Devonshire Street is the east-west spine through town — shops, the post office, the library, and the Chatsworth Transportation Center near Old Depot Plaza and the Metrolink / Metro G Line station. Topanga Canyon Boulevard (State Route 27) and De Soto Avenue carry most of the north-south commercial and industrial traffic. Mason Avenue, Canoga Avenue, Chatsworth Street, Lassen Street, Plummer Street, and Nordhoff Street pick up more suites, warehouses, and house streets. The 118 freeway cuts the north edge toward Porter Ranch.
West toward Santa Susana Pass Road and the parks, lots get larger and more ranch-style. East toward Northridge the streets flatten into tract houses and offices. The usual mismatch is treating a warehouse office wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a tilt-up or a hillside house up. Occupied houses, open shops, and after-hours industrial suites need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Chatsworth Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Chatsworth, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, industrial suite, soffit, rated assembly, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Chatsworth, CA
This page is steel and metal stud framing in Chatsworth — ZIP 91311, a City of Los Angeles neighborhood in the northwest San Fernando Valley, from our Fairfield shop. Permits inside city limits run through LADBS, not Simi Valley, unincorporated county, or a neighboring Valley neighborhood with a different name on the mailbox. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Chatsworth address. No structural steel building. No promise that metal studs hold a tilt-up or a hillside house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. This page is Chatsworth — not Canoga Park, Northridge, Porter Ranch, West Hills, Winnetka, or Simi Valley.
Chatsworth Metal Stud FAQs
Do you do steel / metal stud framing in Chatsworth?
Yes. Interior light-gauge metal stud framing in Chatsworth, CA 91311 from our Fairfield shop — partitions, Devonshire and Topanga TI walls, industrial suite interiors, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Chatsworth the same as Canoga Park, Northridge, or Porter Ranch?
No. Chatsworth is its own Los Angeles neighborhood with ZIP 91311. Canoga Park, Northridge, Porter Ranch, West Hills, and Winnetka are different Valley neighborhoods. Simi Valley is Ventura County. Text the street so we bid the right city desk.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and building structure that hold the roof up are a different contractor.
Do Chatsworth houses use metal studs or wood?
Most house walls here are still wood. Metal wins on commercial TIs, industrial offices, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop or warehouse office on Devonshire, Topanga, or De Soto?
Yes. Occupied retail, office, and industrial tenant improvements on Devonshire Street, Topanga Canyon Boulevard, De Soto Avenue, and Mason Avenue are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Chatsworth buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open shop, or an after-hours industrial suite. A full TI is still a construction job — plan rooms.
Do you work Devonshire, Topanga, De Soto, Mason, and Lassen?
Yes. Devonshire Street, Topanga Canyon Boulevard, De Soto Avenue, Mason Avenue, Chatsworth Street, Lassen Street, Plummer Street, Canoga Avenue, and Nordhoff Street are on the same framing page. Text the street with the photos.
Who issues the permit in Chatsworth?
LADBS. Chatsworth is in the City of Los Angeles. Valley plan check is at the Van Nuys Development Services Center, 6262 Van Nuys Boulevard. Unincorporated county land and Simi Valley are different agencies — that is why the street matters.
How much does metal stud framing cost in Chatsworth?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Chatsworth Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099