Canoga Park, CA 91303 • 91304 • City of Los Angeles Neighborhood • San Fernando Valley • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Canoga Park, CA
Light-gauge steel and metal stud framing in Canoga Park — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Sherman Way shops, Canoga Avenue interiors, and house remodels in 91303 and 91304.
Canoga Park Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield — a Valley run, not a Sherman Way storefront. Canoga Park is a neighborhood of the City of Los Angeles in the San Fernando Valley. It is not its own city. The town started as Owensmouth in 1912, joined Los Angeles in 1917, and took the Canoga Park name in 1931. West Hills split off in 1987. Street ZIPs 91303 and 91304 are Canoga Park. 91304 also covers parts of West Hills and Box Canyon. This page is steel / metal stud framing at City of Los Angeles addresses in Canoga Park — Sherman Way, Canoga Avenue, Topanga Canyon Boulevard, and Owensmouth Avenue. The street decides the bid.
Text “Canoga Park” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Canoga Park
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls at Canoga Park 91303 and 91304 addresses. This is the skeleton the board hangs on.
Sherman Way TIs
Shop, restaurant, office, and commercial build-outs on Sherman Way when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Canoga Avenue and Topanga interiors
Occupied shops and commercial walls on Canoga Avenue, Topanga Canyon Boulevard, Owensmouth Avenue, and Vanowen Street. Occupied buildings change the layout — not the stud spec.
House remodel partitions
New interior steel walls inside an existing Canoga Park house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Canoga Park Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Sherman Way TI, Canoga Avenue shop, rated walls, or a finish that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, shop TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Canoga Park house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Canoga Park Streets, ZIP, and Permits
Canoga Park is a neighborhood of the City of Los Angeles — not an incorporated city of its own. There is no City of Canoga Park Building Department. Los Angeles Department of Building and Safety (LADBS) issues permits inside city limits. Street ZIPs 91303 and 91304 are Canoga Park. 91304 also covers parts of West Hills and Box Canyon. PO boxes use 91305, 91308, and 91309. Area codes are 818 and 747. Text the street so the bid matches LADBS at the Van Nuys Development Services Center — not City of Calabasas Building, not Hidden Hills, and not Ventura County for a Bell Canyon lot.
Permits for City of Los Angeles addresses in Canoga Park run through LADBS. Valley Development Services Center: 6262 Van Nuys Boulevard, 2nd Floor, Room 251, Van Nuys, CA 91401. Call 311 inside the city. Call (213) 473-3231 from outside. Inspection request line: (888) 524-2845. Website is ladbs.org. Metro counter is 201 North Figueroa Street, Los Angeles, CA 90012. City of Calabasas Building and Safety is a different office. City of Hidden Hills is a different office. Bell Canyon is unincorporated Ventura County. Those are different offices.
Winnetka sits east in 91306. West Hills sits west in 91307. Chatsworth sits north in 91311. Woodland Hills sits south in 91364 and 91367. Reseda sits east. Hidden Hills and Calabasas are separate cities. Sherman Way is the historic commercial spine. Canoga Avenue, Topanga Canyon Boulevard, Owensmouth Avenue, Roscoe Boulevard, Victory Boulevard, and Vanowen Street fill in the grid. Text the street so the bid matches LADBS for a city address — not a Calabasas or Bell Canyon permit.
Commercial work sits on Sherman Way, Canoga Avenue, and Topanga Canyon Boulevard. Occupied houses and open shops change the layout — not the stud spec. The 101, the 118, and Topanga traffic change the schedule.
The usual mismatch is treating a Sherman Way shop wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Canoga Park Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Canoga Park, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Canoga Park, CA
This page is steel and metal stud framing in Canoga Park — City of Los Angeles lots in 91303 and 91304 — from our Fairfield shop. LADBS Valley counter is at 6262 Van Nuys Boulevard. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No City of Canoga Park Building Department — there is no such city office. No Los Angeles County permit for a City of Los Angeles lot in Canoga Park. No claim that every 91304 address is Canoga Park — that ZIP also covers parts of West Hills and Box Canyon. No claim that 91306 is Canoga Park — that ZIP is Winnetka. No claim that 91307 is Canoga Park — that ZIP is West Hills and Bell Canyon. No storefront on Sherman Way. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Winnetka, West Hills, Chatsworth, Woodland Hills, Calabasas, Hidden Hills, Bell Canyon, and other addresses that only sit next to Canoga Park are different places. This page is Canoga Park, CA, ZIPs 91303 and 91304, City of Los Angeles — text the street so the permit office matches the address.
Canoga Park Metal Stud FAQs
Do you do steel / metal stud framing in Canoga Park?
Yes. Interior light-gauge metal stud framing in Canoga Park, CA from our Fairfield shop — partitions, Sherman Way TIs, Canoga Avenue interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Canoga Park a city?
No. Canoga Park is a neighborhood of the City of Los Angeles in the San Fernando Valley. The town started as Owensmouth in 1912, joined Los Angeles in 1917, and took the Canoga Park name in 1931. There is no City of Canoga Park Building Department. Permits run through LADBS.
Is West Hills or Winnetka the same as Canoga Park?
No. West Hills split from Canoga Park in 1987 and uses 91307. Winnetka sits east in 91306. Both are still City of Los Angeles neighborhoods and still use LADBS, but this page is Canoga Park 91303 and 91304. Text the street.
Is Chatsworth or Woodland Hills the same as Canoga Park?
No. Chatsworth sits north in 91311. Woodland Hills sits south in 91364 and 91367. Calabasas and Hidden Hills are separate cities. Bell Canyon is unincorporated Ventura County. Text the street so the bid matches the right neighborhood and the right permit office.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Canoga Park houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Sherman Way TIs, rated walls, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Sherman Way?
Yes. Occupied retail, restaurant, office, and commercial tenant improvements on Sherman Way, Canoga Avenue, Topanga Canyon Boulevard, and Owensmouth Avenue are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Canoga Park buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. The 101, the 118, and Topanga traffic change the schedule — not the stud spec.
What ZIP does this Canoga Park page cover?
This page covers City of Los Angeles street addresses in Canoga Park ZIPs 91303 and 91304. PO boxes use 91305, 91308, and 91309. 91306 is Winnetka. 91307 is West Hills and Bell Canyon. Text the street with the photos so the bid matches LADBS.
Do you work Sherman Way, Canoga Avenue, and Topanga Canyon Boulevard?
Yes. Sherman Way, Canoga Avenue, Topanga Canyon Boulevard, Owensmouth Avenue, Roscoe Boulevard, Victory Boulevard, Vanowen Street, and other City of Los Angeles addresses in Canoga Park are on this framing page. Text the street with the photos.
Who issues the permit in Canoga Park?
Los Angeles Department of Building and Safety. Valley Development Services Center: 6262 Van Nuys Boulevard, 2nd Floor, Room 251, Van Nuys, CA 91401. Call 311 inside the city or (213) 473-3231 from outside. There is no City of Canoga Park Building Department. City of Calabasas Building and Safety is a different office. Ventura County Building and Safety is a different office for Bell Canyon.
How much does metal stud framing cost in Canoga Park?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work at a City of Los Angeles address in Canoga Park uses LADBS — not Los Angeles County Building and Safety unless the lot is outside city limits.
Need Canoga Park Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099