Calabasas, CA 91302 • Incorporated City • Los Angeles County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Calabasas, CA
Light-gauge steel and metal stud framing in Calabasas — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: The Commons shops, Calabasas Road interiors, Parkway Calabasas offices, and house remodels in 91302.
Calabasas Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield — a Valley-to-Westside run, not a Parkway Calabasas storefront. Calabasas is an incorporated city in Los Angeles County. It is not a neighborhood of the City of Los Angeles. Voters approved cityhood in 1991. The City of Calabasas incorporated on April 5, 1991. Hidden Hills is a different city. Woodland Hills is a City of Los Angeles neighborhood. The primary street ZIP is 91302. 91372 is the Calabasas PO Box. 91301 is Agoura Hills first — some mail also accepts Calabasas as a city name on that ZIP. 91302 also covers Hidden Hills and Monte Nido mail. This page is steel / metal stud framing at City of Calabasas addresses — Calabasas Road, Parkway Calabasas, Las Virgenes Road, Commons Way, Civic Center Way, and Park Granada. The street decides the bid.
Text “Calabasas” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Calabasas
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls at City of Calabasas 91302 addresses. This is the skeleton the board hangs on.
The Commons and Calabasas Road TIs
Shop, restaurant, office, and commercial build-outs at The Commons, on Calabasas Road, and on Parkway Calabasas when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Las Virgenes and Civic Center interiors
Occupied shops and commercial walls on Las Virgenes Road, Civic Center Way, Park Sorrento, Park Granada, and Commons Way. Occupied buildings change the layout — not the stud spec.
House remodel partitions
New interior steel walls inside an existing Calabasas house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Calabasas Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | The Commons TI, Calabasas Road shop, rated walls, or a finish that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, shop TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Calabasas house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Calabasas Streets, ZIP, and Permits
Calabasas is an incorporated city in Los Angeles County — not a City of Los Angeles neighborhood. There is a City of Calabasas Building and Safety Division. LADBS does not issue permits inside city limits. The primary street ZIP is 91302. PO boxes use 91372. 91301 is Agoura Hills first. 91302 also covers Hidden Hills and Monte Nido. Area codes are 818 and 747. Text the street so the bid matches City of Calabasas Building and Safety at City Hall — not LADBS in Van Nuys, not City of Hidden Hills, not City of Agoura Hills, and not Los Angeles County Building and Safety for a Monte Nido lot.
Permits for City of Calabasas addresses run through City of Calabasas Community Development, Building and Safety Division: 100 Civic Center Way, Calabasas, CA 91302. Main line: (818) 224-1600. Permit Center: (818) 224-2534. Email: BuildingSafetyInfo@cityofcalabasas.com. Website is cityofcalabasas.com. Inspections are scheduled through the City of Calabasas online permit portal. City of Hidden Hills Building and Safety is a different office at 6165 Spring Valley Road. Woodland Hills City of Los Angeles lots use LADBS. Monte Nido is unincorporated Los Angeles County. Those are different offices.
Hidden Hills sits north and uses the same 91302 ZIP — it is still its own city. Woodland Hills sits east in 91364 and 91367 and is City of Los Angeles. Agoura Hills sits west in 91301. Canoga Park sits farther east as a City of Los Angeles neighborhood. Topanga and Malibu sit south. Monte Nido is unincorporated. Bell Canyon is unincorporated Ventura County. Calabasas Road is Old Town. Parkway Calabasas, Las Virgenes Road, Mulholland Highway, Valley Circle Boulevard, Commons Way, Civic Center Way, Park Granada, Park Sorrento, Lost Hills Road, and Agoura Road fill in the grid. Text the street so the bid matches City of Calabasas for a city address — not a Hidden Hills, Woodland Hills, or Monte Nido permit.
Commercial work sits at The Commons, on Calabasas Road, Parkway Calabasas, and Las Virgenes Road. Occupied houses and open shops change the layout — not the stud spec. The 101, Las Virgenes, and Mulholland traffic change the schedule.
The usual mismatch is treating a Commons shop wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Calabasas Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Calabasas, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Calabasas, CA
This page is steel and metal stud framing in the City of Calabasas — incorporated Los Angeles County lots in 91302 — from our Fairfield shop. City of Calabasas Building and Safety is at 100 Civic Center Way. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No LADBS permit for a City of Calabasas lot. No Los Angeles County permit for an incorporated Calabasas address. No claim that every 91302 address is Calabasas — that ZIP also covers Hidden Hills and Monte Nido. No claim that 91301 is Calabasas — that ZIP is Agoura Hills first. No storefront on Parkway Calabasas. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Hidden Hills, Woodland Hills, Agoura Hills, Canoga Park, Monte Nido, Topanga, Malibu, Bell Canyon, and other addresses that only sit next to Calabasas are different places. This page is the City of Calabasas, CA, ZIP 91302 — text the street so the permit office matches the address.
Calabasas Metal Stud FAQs
Do you do steel / metal stud framing in Calabasas?
Yes. Interior light-gauge metal stud framing in Calabasas, CA from our Fairfield shop — partitions, The Commons TIs, Calabasas Road interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Calabasas a city?
Yes. Calabasas is an incorporated city in Los Angeles County. Voters approved cityhood in 1991. The City of Calabasas incorporated on April 5, 1991. It is not a neighborhood of the City of Los Angeles. There is a City of Calabasas Building and Safety Division. Permits run through that office, not LADBS.
Is Hidden Hills or Woodland Hills the same as Calabasas?
No. Hidden Hills is its own incorporated city and has its own Building and Safety office, even though mail often uses 91302. Woodland Hills is a City of Los Angeles neighborhood and uses LADBS. This page is the City of Calabasas. Text the street.
Is Agoura Hills or Canoga Park the same as Calabasas?
No. Agoura Hills is a separate city and uses 91301. Canoga Park is a City of Los Angeles neighborhood. Monte Nido is unincorporated Los Angeles County. Bell Canyon is unincorporated Ventura County. Text the street so the bid matches the right city and the right permit office.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Calabasas houses use metal studs or wood?
Most house walls here are still wood. Metal wins on The Commons TIs, rated walls, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop at The Commons or on Calabasas Road?
Yes. Occupied retail, restaurant, office, and commercial tenant improvements at The Commons, on Calabasas Road, Parkway Calabasas, and Las Virgenes Road are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Calabasas buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. The 101, Las Virgenes, and Mulholland traffic change the schedule — not the stud spec.
What ZIP does this Calabasas page cover?
This page covers City of Calabasas street addresses in ZIP 91302. PO boxes use 91372. 91301 is Agoura Hills first. Hidden Hills and Monte Nido also use 91302 mail — those are different permit offices. Text the street with the photos so the bid matches City of Calabasas Building and Safety.
Do you work Calabasas Road, Parkway Calabasas, and Las Virgenes Road?
Yes. Calabasas Road, Parkway Calabasas, Las Virgenes Road, Commons Way, Civic Center Way, Park Granada, Park Sorrento, Mulholland Highway, Valley Circle Boulevard, Lost Hills Road, Agoura Road, and other City of Calabasas addresses are on this framing page. Text the street with the photos.
Who issues the permit in Calabasas?
City of Calabasas Building and Safety Division. City Hall: 100 Civic Center Way, Calabasas, CA 91302. Call (818) 224-1600 or the Permit Center at (818) 224-2534. Inspections go through the city online portal. LADBS is a different office for City of Los Angeles lots. City of Hidden Hills Building and Safety is a different office. Los Angeles County Building and Safety is a different office for Monte Nido and other unincorporated lots.
How much does metal stud framing cost in Calabasas?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work at a City of Calabasas address uses City of Calabasas Building and Safety — not LADBS and not Los Angeles County Building and Safety unless the lot is outside city limits.
Need Calabasas Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099