Bloomington, CA 92316 • Unincorporated San Bernardino County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Bloomington, CA
Light-gauge steel and metal stud framing in Bloomington — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Valley Boulevard shops, Cedar Avenue build-outs, Slover Avenue warehouse offices, and house remodels in 92316.
Bloomington Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Valley Boulevard storefront. Bloomington is an unincorporated community in San Bernardino County — Inland Empire — not Fontana, not Rialto, and not Colton. It does not have its own city building department. Crestmore can use a 92316 mailing name. This page is steel / metal stud framing at Bloomington 92316 addresses — Valley Boulevard, Cedar Avenue, Slover Avenue, Santa Ana Avenue, Alder Avenue, and Linden Avenue. The street decides the bid.
Text “Bloomington” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Bloomington
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in Bloomington 92316 addresses. This is the skeleton the board hangs on.
Valley Boulevard TIs
Shop, restaurant, office, and commercial build-outs on Valley Boulevard when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Cedar Avenue and I-10 interiors
Retail and shop partitions on Cedar Avenue at the I-10 crossing, plus interiors on Locust Avenue, Larch Avenue, and Spruce Avenue. Fontana and Rialto sit on the edges — the parcel still decides the permit office.
Slover Avenue warehouse offices
Office build-outs, break-room walls, and shop partitions on Slover Avenue, Agua Mansa Road, and industrial corridors. Occupied warehouses change the layout — not the stud spec.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Bloomington house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Bloomington Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Valley Boulevard TI, Cedar Avenue shop, Slover Avenue warehouse office, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, warehouse offices, Valley Boulevard TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Bloomington house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Bloomington Streets, ZIP, and Permits
Bloomington is unincorporated San Bernardino County — Inland Empire — not an incorporated city. This page uses street ZIP 92316. Crestmore is a 92316 alias name, not a second town. Area codes are 909 and 840. Portions of 92316 also touch Rialto, Fontana, and Colton mailing edges. Text the street so the bid matches San Bernardino County Building & Safety — not City of Fontana Building, not City of Rialto Building, and not City of Colton Building.
Permits for Bloomington addresses in unincorporated San Bernardino County run through County of San Bernardino Land Use Services, Building & Safety, 385 N. Arrowhead Ave., San Bernardino, CA 92415. Call (909) 387-8311 or toll-free (800) 722-4542. Use EZ Online Permitting (EZOP) for many applications. County site is lus.sbcounty.gov. Annexed or city-limit parcels that only use a Bloomington mailing ZIP run through the city that actually holds the lot.
Fontana sits west. Rialto sits east. Colton and Grand Terrace sit east and south. Jurupa Valley sits south across the river. I-10 cuts the community. Text the street so the bid matches County Building for a Bloomington County address — not a Fontana, Rialto, or Colton city permit.
Commercial work sits on Valley Boulevard, Cedar Avenue, Slover Avenue, Santa Ana Avenue, Alder Avenue, Linden Avenue, Locust Avenue, Larch Avenue, Spruce Avenue, and Agua Mansa Road. Occupied houses, open shops, and warehouse offices change the layout — not the stud spec.
The usual mismatch is treating a Valley Boulevard tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Bloomington Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Bloomington, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Bloomington, CA
This page is steel and metal stud framing in Bloomington — ZIP 92316, unincorporated San Bernardino County — from our Fairfield shop. County Building & Safety is at 385 N. Arrowhead Ave. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No claim that Bloomington is an incorporated city. No City of Bloomington Building Department — it does not exist. No Fontana, Rialto, or Colton permit for a Bloomington County lot. No storefront on Valley Boulevard. No structural steel building. No promise that metal studs hold the building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Fontana, Rialto, Colton, Jurupa Valley, and city-limit addresses that only use a Bloomington mailing ZIP are different places. This page is Bloomington, CA, ZIP 92316, unincorporated San Bernardino County — text the street so the permit office matches the address.
Bloomington Metal Stud FAQs
Do you do steel / metal stud framing in Bloomington?
Yes. Interior light-gauge metal stud framing in Bloomington, CA from our Fairfield shop — partitions, Valley Boulevard TIs, Cedar Avenue interiors, Slover Avenue warehouse offices, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Bloomington a city?
No. Bloomington is an unincorporated community in San Bernardino County. Building permits run through County Building & Safety — not a city hall on Valley Boulevard, and not Fontana, Rialto, or Colton city hall.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Bloomington houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Valley Boulevard TIs, Cedar Avenue shops, warehouse office partitions, rated walls, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Valley Boulevard or Cedar Avenue?
Yes. Occupied retail, restaurant, office, and commercial tenant improvements on Valley Boulevard, Cedar Avenue, and Slover Avenue are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Bloomington buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. A full TI is still a construction job — plan rooms.
Does 92316 cover all of Bloomington?
92316 is the Bloomington street ZIP. Crestmore uses 92316 as a mailing name. Portions of 92316 also touch Rialto, Fontana, and Colton edges. Nearby Fontana uses 92335 and 92337. Rialto uses 92376. Colton uses 92324. Text the street so the bid matches County Building — not Fontana 92335 and not Rialto 92376.
Do you work Valley Boulevard, Cedar Avenue, and Slover Avenue?
Yes. Valley Boulevard, Cedar Avenue, Slover Avenue, Santa Ana Avenue, Alder Avenue, Linden Avenue, Locust Avenue, Larch Avenue, Spruce Avenue, Agua Mansa Road, and other Bloomington 92316 addresses are on this framing page. Text the street with the photos.
What ZIP does this Bloomington page cover?
This page covers Bloomington 92316 street addresses in unincorporated San Bernardino County. Text the street with the photos so the bid matches County Building — not Fontana 92335 / 92337, not Rialto 92376, and not Colton 92324.
Who issues the permit in Bloomington?
San Bernardino County Land Use Services, Building & Safety, 385 N. Arrowhead Ave., San Bernardino, CA 92415. Call (909) 387-8311. City of Fontana Building is a different office. City of Rialto Building is a different office. City of Colton Building is a different office.
How much does metal stud framing cost in Bloomington?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work at a Bloomington 92316 County address uses San Bernardino County Building & Safety — not a Fontana, Rialto, or Colton city permit unless the lot is inside that city.
Need Bloomington Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099