Beverly Hills, CA 90210 • 90211 • 90212 • Incorporated City • Los Angeles County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Beverly Hills, CA
Light-gauge steel and metal stud framing in Beverly Hills — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Golden Triangle shops, Wilshire Boulevard interiors, and house remodels in 90210, 90211, and 90212.
Beverly Hills Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield — a Westside run, not a Rodeo Drive storefront. Beverly Hills is an incorporated city in Los Angeles County. It is not a neighborhood of the City of Los Angeles. The city incorporated in 1914. West Hollywood is a different city. Bel Air, Holmby Hills, Century City, and Westwood are City of Los Angeles neighborhoods. Street ZIPs 90210, 90211, and 90212 are Beverly Hills. PO boxes use 90209 and 90213. 90210 also covers City of Los Angeles hillside mail served by the Beverly Hills Post Office. This page is steel / metal stud framing at City of Beverly Hills addresses — Wilshire Boulevard, Santa Monica Boulevard, Rodeo Drive, Beverly Drive, and Canon Drive. The street decides the bid.
Text “Beverly Hills” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Beverly Hills
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls at City of Beverly Hills 90210–90212 addresses. This is the skeleton the board hangs on.
Golden Triangle TIs
Shop, restaurant, office, medical, and commercial build-outs in the Golden Triangle — Wilshire Boulevard, Santa Monica Boulevard, Rodeo Drive, and Canon Drive — when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Wilshire, Beverly, and Olympic interiors
Occupied shops and commercial walls on Wilshire Boulevard, Beverly Drive, Olympic Boulevard, Robertson Boulevard, and Burton Way. Occupied buildings change the layout — not the stud spec.
House remodel partitions
New interior steel walls inside an existing Beverly Hills house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Beverly Hills Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Golden Triangle TI, Wilshire shop, rated walls, or a finish that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, shop TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Beverly Hills house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Beverly Hills Streets, ZIP, and Permits
Beverly Hills is an incorporated city in Los Angeles County — not a City of Los Angeles neighborhood. There is a City of Beverly Hills Building & Safety Division. LADBS does not issue permits inside city limits. Street ZIPs 90210, 90211, and 90212 are Beverly Hills. PO boxes use 90209 and 90213. 90210 also covers City of Los Angeles hillside lots that only use the Beverly Hills Post Office for mail. Area codes are 310 and 424. Text the street so the bid matches City of Beverly Hills Building & Safety at 455 North Rexford Drive — not LADBS, not City of West Hollywood, and not a Bel Air or Century City City of Los Angeles lot.
Permits for City of Beverly Hills addresses run through City of Beverly Hills Community Development, Building & Safety Division: 455 North Rexford Drive, Beverly Hills, CA 90210. Call (310) 285-1000. Email: cdpermits@beverlyhills.org. Website is beverlyhills.org. Inspections are scheduled through CitySmart. City of West Hollywood Building and Safety is a different office. City of Los Angeles lots in Bel Air, Holmby Hills, Century City, Westwood, and the 90210 hillside mail area use LADBS. Those are different offices.
West Hollywood sits east. Bel Air and Holmby Hills sit west and northwest as City of Los Angeles neighborhoods. Century City and Westwood sit west. Wilshire Boulevard and Santa Monica Boulevard frame the Golden Triangle. Rodeo Drive, Beverly Drive, Canon Drive, Crescent Drive, Rexford Drive, Olympic Boulevard, Robertson Boulevard, Burton Way, Sunset Boulevard, and Doheny Drive fill in the grid. Text the street so the bid matches City of Beverly Hills for a city address — not a West Hollywood or Bel Air permit.
Commercial work sits in the Golden Triangle, on Wilshire Boulevard, Santa Monica Boulevard, and Olympic Boulevard. Occupied houses and open shops change the layout — not the stud spec. Wilshire, Santa Monica Boulevard, and the 405 traffic change the schedule.
The usual mismatch is treating a Rodeo or Wilshire shop wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Beverly Hills Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Beverly Hills, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Beverly Hills, CA
This page is steel and metal stud framing in the City of Beverly Hills — incorporated Los Angeles County lots in 90210, 90211, and 90212 — from our Fairfield shop. City of Beverly Hills Building & Safety is at 455 North Rexford Drive. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No LADBS permit for a City of Beverly Hills lot. No Los Angeles County permit for an incorporated Beverly Hills address. No claim that every 90210 address is the City of Beverly Hills — that ZIP also covers City of Los Angeles hillside mail served by the Beverly Hills Post Office. No storefront on Rodeo Drive. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. West Hollywood, Bel Air, Holmby Hills, Century City, Westwood, and other addresses that only sit next to Beverly Hills are different places. This page is the City of Beverly Hills, CA, street ZIPs 90210, 90211, and 90212 — text the street so the permit office matches the address.
Beverly Hills Metal Stud FAQs
Do you do steel / metal stud framing in Beverly Hills?
Yes. Interior light-gauge metal stud framing in Beverly Hills, CA from our Fairfield shop — partitions, Golden Triangle TIs, Wilshire interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Beverly Hills a city?
Yes. Beverly Hills is an incorporated city in Los Angeles County. The city incorporated in 1914. It is not a neighborhood of the City of Los Angeles. There is a City of Beverly Hills Building & Safety Division. Permits run through that office, not LADBS.
Is West Hollywood or Bel Air the same as Beverly Hills?
No. West Hollywood is its own incorporated city and has its own Building and Safety office. Bel Air is a City of Los Angeles neighborhood and uses LADBS. This page is the City of Beverly Hills. Text the street.
Is Century City or Holmby Hills the same as Beverly Hills?
No. Century City, Holmby Hills, and Westwood are City of Los Angeles neighborhoods and use LADBS. A 90210 mailing address in the hills can still be City of Los Angeles. Text the street so the bid matches the right city and the right permit office.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Beverly Hills houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Golden Triangle TIs, rated walls, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop in the Golden Triangle?
Yes. Occupied retail, restaurant, office, medical, and commercial tenant improvements on Wilshire Boulevard, Santa Monica Boulevard, Rodeo Drive, Beverly Drive, and Canon Drive are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Beverly Hills buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. Wilshire, Santa Monica Boulevard, and the 405 traffic change the schedule — not the stud spec.
What ZIP does this Beverly Hills page cover?
This page covers City of Beverly Hills street addresses in 90210, 90211, and 90212. PO boxes use 90209 and 90213. 90210 also covers City of Los Angeles hillside mail served by the Beverly Hills Post Office. Text the street with the photos so the bid matches City of Beverly Hills Building & Safety.
Do you work Wilshire Boulevard, Rodeo Drive, and Santa Monica Boulevard?
Yes. Wilshire Boulevard, Santa Monica Boulevard, Rodeo Drive, Beverly Drive, Canon Drive, Crescent Drive, Rexford Drive, Olympic Boulevard, Robertson Boulevard, Burton Way, Sunset Boulevard, Doheny Drive, and other City of Beverly Hills addresses are on this framing page. Text the street with the photos.
Who issues the permit in Beverly Hills?
City of Beverly Hills Building & Safety Division. 455 North Rexford Drive, Beverly Hills, CA 90210. Call (310) 285-1000. Inspections go through CitySmart. LADBS is a different office for City of Los Angeles lots, including many 90210 hillside addresses. City of West Hollywood Building and Safety is a different office.
How much does metal stud framing cost in Beverly Hills?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work at a City of Beverly Hills address uses City of Beverly Hills Building & Safety — not LADBS and not Los Angeles County Building and Safety unless the lot is outside city limits.
Need Beverly Hills Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099