Bellflower, CA 90706 • Incorporated City • Los Angeles County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Bellflower, CA
Light-gauge steel and metal stud framing in Bellflower — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Bellflower Boulevard shops, Alondra and Artesia interiors, and house remodels in 90706.
Bellflower Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield — a Gateway Cities run, not a Bellflower Boulevard storefront. Bellflower is an incorporated city in southeastern Los Angeles County. It is not a neighborhood of the City of Los Angeles. The town started in 1906 as Somerset. The present name comes from the bellflower apple grown in local orchards. Voters incorporated the City of Bellflower on September 3, 1957. Downey, Lakewood, Paramount, Norwalk, and Cerritos are different cities. The street ZIP is 90706. PO boxes use 90707. This page is steel / metal stud framing at City of Bellflower addresses — Bellflower Boulevard, Alondra Boulevard, Artesia Boulevard, Woodruff Avenue, and Flower Street. The street decides the bid.
Text “Bellflower” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Bellflower
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls at City of Bellflower 90706 addresses. This is the skeleton the board hangs on.
Bellflower Boulevard TIs
Shop, restaurant, office, medical, and commercial build-outs on Bellflower Boulevard when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Alondra, Artesia, and Woodruff interiors
Occupied shops and commercial walls on Alondra Boulevard, Artesia Boulevard, Woodruff Avenue, Lakewood Boulevard, and Clark Avenue. Occupied buildings change the layout — not the stud spec.
House remodel partitions
New interior steel walls inside an existing Bellflower house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Bellflower Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Bellflower Boulevard TI, Alondra shop, rated walls, or a finish that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, shop TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Bellflower house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Bellflower Streets, ZIP, and Permits
Bellflower is an incorporated city in southeastern Los Angeles County — not a City of Los Angeles neighborhood. There is a City of Bellflower Building & Safety Division. LADBS does not issue permits inside city limits. The street ZIP is 90706. PO boxes use 90707. Area code is 562. Text the street so the bid matches City of Bellflower Building & Safety at 16600 Civic Center Drive — not LADBS, not City of Downey, not City of Lakewood, and not City of Paramount.
Permits for City of Bellflower addresses run through City of Bellflower Planning Department, Building & Safety Division: 16600 Civic Center Drive, Bellflower, CA 90706. Call (562) 804-1424. Building & Safety counter: ext. 2006. Inspections: ext. 2230. Email: ptechnician@bellflower.ca.gov. Website is bellflower.org. City of Downey Building and Safety is a different office. City of Lakewood, City of Paramount, City of Norwalk, and City of Cerritos are different offices. Those are different cities.
Downey sits north. Paramount sits west. Lakewood and Long Beach sit south. Norwalk and Cerritos sit east. Artesia sits farther southeast. Bellflower Boulevard is the historic commercial spine. Alondra Boulevard, Artesia Boulevard, Lakewood Boulevard, Woodruff Avenue, Clark Avenue, Flower Street, Civic Center Drive, Somerset Boulevard, and Rosecrans Avenue fill in the grid. Text the street so the bid matches City of Bellflower for a city address — not a Downey or Lakewood permit.
Commercial work sits on Bellflower Boulevard, Alondra Boulevard, and Artesia Boulevard. Occupied houses and open shops change the layout — not the stud spec. The 91, the 605, and Bellflower Boulevard traffic change the schedule.
The usual mismatch is treating a Bellflower Boulevard shop wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Bellflower Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Bellflower, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Bellflower, CA
This page is steel and metal stud framing in the City of Bellflower — incorporated Los Angeles County lots in 90706 — from our Fairfield shop. City of Bellflower Building & Safety is at 16600 Civic Center Drive. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No LADBS permit for a City of Bellflower lot. No Los Angeles County permit for an incorporated Bellflower address. No claim that 90707 is a street ZIP — that code is the Bellflower PO Box. No storefront on Bellflower Boulevard. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Downey, Lakewood, Paramount, Norwalk, Cerritos, Long Beach, Artesia, and other addresses that only sit next to Bellflower are different places. This page is the City of Bellflower, CA, ZIP 90706 — text the street so the permit office matches the address.
Bellflower Metal Stud FAQs
Do you do steel / metal stud framing in Bellflower?
Yes. Interior light-gauge metal stud framing in Bellflower, CA from our Fairfield shop — partitions, Bellflower Boulevard TIs, Alondra and Artesia interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Bellflower a city?
Yes. Bellflower is an incorporated city in southeastern Los Angeles County. The town started in 1906 as Somerset. The City of Bellflower incorporated on September 3, 1957. It is not a neighborhood of the City of Los Angeles. There is a City of Bellflower Building & Safety Division. Permits run through that office, not LADBS.
Is Downey or Lakewood the same as Bellflower?
No. Downey and Lakewood are separate incorporated cities and each has its own Building and Safety office. This page is the City of Bellflower. Text the street.
Is Paramount, Norwalk, or Cerritos the same as Bellflower?
No. Paramount sits west. Norwalk and Cerritos sit east. Long Beach sits southwest. Artesia sits farther southeast. Those are different cities and different permit offices. Text the street so the bid matches the right city.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Bellflower houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Bellflower Boulevard TIs, rated walls, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Bellflower Boulevard?
Yes. Occupied retail, restaurant, office, medical, and commercial tenant improvements on Bellflower Boulevard, Alondra Boulevard, Artesia Boulevard, Woodruff Avenue, and Lakewood Boulevard are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Bellflower buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. The 91, the 605, and Bellflower Boulevard traffic change the schedule — not the stud spec.
What ZIP does this Bellflower page cover?
This page covers City of Bellflower street addresses in ZIP 90706. PO boxes use 90707. Text the street with the photos so the bid matches City of Bellflower Building & Safety.
Do you work Bellflower Boulevard, Alondra Boulevard, and Artesia Boulevard?
Yes. Bellflower Boulevard, Alondra Boulevard, Artesia Boulevard, Lakewood Boulevard, Woodruff Avenue, Clark Avenue, Flower Street, Civic Center Drive, Somerset Boulevard, Rosecrans Avenue, and other City of Bellflower addresses are on this framing page. Text the street with the photos.
Who issues the permit in Bellflower?
City of Bellflower Building & Safety Division. City Hall: 16600 Civic Center Drive, Bellflower, CA 90706. Call (562) 804-1424. Building & Safety counter: ext. 2006. Inspections: ext. 2230. LADBS is a different office for City of Los Angeles lots. City of Downey, City of Lakewood, City of Paramount, City of Norwalk, and City of Cerritos are different offices.
How much does metal stud framing cost in Bellflower?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work at a City of Bellflower address uses City of Bellflower Building & Safety — not LADBS and not Los Angeles County Building and Safety unless the lot is outside city limits.
Need Bellflower Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099