Beaumont, CA 92223 • San Gorgonio Pass • Incorporated 1912 • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Beaumont, CA
Light-gauge steel and metal stud framing in Beaumont — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: 6th Street shops, Beaumont Avenue suites, Oak Valley interiors, and house remodels. Beaumont is Riverside County. Banning is a different city hall.
Beaumont Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Beaumont storefront. This page is steel / metal stud framing in Beaumont, CA — 6th Street, Beaumont Avenue, Oak Valley Parkway, Highland Springs Avenue, and Brookside Avenue.
Text “Beaumont” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. A 92223 label is not always city limits. The street decides the desk.
Metal Stud Work We Do in Beaumont
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 92223. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, medical, and office build-outs on 6th Street, Beaumont Avenue, and Oak Valley Parkway. If the drawing says steel studs, that is the bid. Commercial framing →
Downtown, I-10, and tract interiors
Shop partitions, restaurant walls, and rated assemblies in Downtown Beaumont, 6th Street, Oak Valley Parkway, Tournament Hills, and Sundance interiors inside city limits.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Remodel and ADU partitions
New interior steel walls inside an existing Beaumont house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Beaumont Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | 6th Street TI, Beaumont Avenue shops, Oak Valley interiors, medical suites, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, office interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most house walls off Beaumont Avenue, Brookside, Tournament Hills, Sundance, Four Seasons, and Oak Valley with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or block walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
6th Street vs Banning vs Cherry Valley
Beaumont is an incorporated San Gorgonio Pass city in Riverside County — 1912 — at I-10 and State Route 60. The ZIP is 92223. It uses the 951 / 909 / 840 overlay. Banning sits east. Calimesa sits northwest. Cherry Valley sits as unincorporated county. Permits inside city limits run through the City of Beaumont Building and Safety at 550 E. 6th Street, 92223. Sharing the pass does not share a city hall.
This page is Beaumont, California — not Beaumont, Texas. A 92223 mailing label can already be Cherry Valley. A 6th Street shop inside city limits is this desk. Text the street so we bid the right desk.
6th Street, Beaumont Avenue, Oak Valley Parkway, Highland Springs Avenue, Brookside Avenue, and Cherry Valley Boulevard carry the shops and through traffic. Downtown sits on 6th Street. Tournament Hills, Sundance, Four Seasons, and Oak Valley sit as newer tracts. Occupied shops, hillside houses, and tract remodels change the layout — not the stud spec.
The usual mismatch is treating a 6th Street tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a house up. Occupied houses, open Downtown shops, and after-hours offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Beaumont Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Beaumont, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, 6th Street shop, Oak Valley suite, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Beaumont, CA
This page is steel and metal stud framing in Beaumont — ZIP 92223, an incorporated San Gorgonio Pass city in Riverside County, from our Fairfield shop. Permits inside city limits run through the City of Beaumont, not Banning, Calimesa, or Cherry Valley. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Beaumont address. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. This page is Beaumont, California — not Banning, Calimesa, Cherry Valley, or Beaumont, Texas.
Beaumont Metal Stud FAQs
Do you do steel / metal stud framing in Beaumont?
Yes. Interior light-gauge metal stud framing in Beaumont, CA from our Fairfield shop — partitions, 6th Street and Beaumont Avenue TIs, Oak Valley interiors, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Beaumont the same as Banning?
No. Beaumont sits west of Banning on the San Gorgonio Pass. I-10 crosses more than one city hall. They do not share a building department.
Is Cherry Valley part of Beaumont?
No. Cherry Valley is unincorporated Riverside County. A 92223 mailing label can already be county. If the address is inside city limits, the desk is 550 E. 6th Street.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Beaumont houses use metal studs or wood?
Most house walls here are still wood. Metal wins on 6th Street, Beaumont Avenue, and Oak Valley TIs, shop interiors, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on 6th Street or Beaumont Avenue?
Yes. Occupied retail and restaurant TIs on 6th Street, Beaumont Avenue, Oak Valley Parkway, and Highland Springs Avenue are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Beaumont buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open 6th Street shop, or an after-hours office. A full TI is still a construction job — plan rooms.
Do you work Downtown, Tournament Hills, and Oak Valley?
Yes. Downtown Beaumont, Tournament Hills, Sundance, Four Seasons, Oak Valley Parkway, and other addresses inside city limits are on the same framing page. Text the street with the photos.
Who issues the permit in Beaumont?
The City of Beaumont Building and Safety at 550 E. 6th Street, CA 92223. Banning, Calimesa, and Cherry Valley are different desks — that is why the street matters.
How much does metal stud framing cost in Beaumont?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Beaumont Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099