Baldwin Park, CA 91706 • Incorporated City • San Gabriel Valley • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Baldwin Park, CA
Light-gauge steel and metal stud framing in Baldwin Park — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Maine Avenue shops, Ramona Boulevard interiors, and house remodels in 91706.
Baldwin Park Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield — a San Gabriel Valley run, not a Maine Avenue storefront. Baldwin Park is an incorporated city in the central San Gabriel Valley of Los Angeles County. It is not a neighborhood of the City of Los Angeles. The town was first called Vineland. It took the Baldwin Park name in the early 1900s. The City of Baldwin Park incorporated on January 25, 1956. West Covina, El Monte, Irwindale, and Industry are different cities. The street ZIP is 91706. That ZIP also lists Irwindale as an alias. This page is steel / metal stud framing at City of Baldwin Park addresses — Maine Avenue, Ramona Boulevard, Pacific Avenue, and Baldwin Park Boulevard. The street decides the bid.
Text “Baldwin Park” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Baldwin Park
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls at City of Baldwin Park 91706 addresses. This is the skeleton the board hangs on.
Maine Avenue TIs
Shop, restaurant, office, medical, and commercial build-outs on Maine Avenue when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Ramona, Pacific, and Baldwin Park Boulevard interiors
Occupied shops and commercial walls on Ramona Boulevard, Pacific Avenue, Baldwin Park Boulevard, Francisquito Avenue, and Garvey Avenue. Occupied buildings change the layout — not the stud spec.
House remodel partitions
New interior steel walls inside an existing Baldwin Park house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Baldwin Park Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Maine Avenue TI, Ramona shop, rated walls, or a finish that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, shop TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Baldwin Park house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Baldwin Park Streets, ZIP, and Permits
Baldwin Park is an incorporated city in the San Gabriel Valley of Los Angeles County — not a City of Los Angeles neighborhood. There is a City of Baldwin Park Building & Safety Division. LADBS does not issue permits inside city limits. The street ZIP is 91706. That ZIP also lists Irwindale as an alias. Area code is 626. Text the street so the bid matches City of Baldwin Park Building & Safety at 14403 Pacific Avenue — not City of Irwindale, not City of West Covina, not City of El Monte, and not the Los Angeles County Public Works yard on Ramona Boulevard.
Permits for City of Baldwin Park addresses run through City of Baldwin Park Building & Safety Division: 14403 Pacific Avenue, Baldwin Park, CA 91706. Call (626) 813-5265. Inspections: (626) 813-5267. Email: BPBuilding@baldwinpark.com. Website is baldwinpark.com. Los Angeles County Public Works has a Baldwin Park permit office at 14747 East Ramona Boulevard — that office is not City of Baldwin Park Building & Safety. City of West Covina, City of El Monte, City of Irwindale, and City of Industry are different offices.
West Covina sits southeast. El Monte sits west. Irwindale sits northeast. Industry and La Puente sit south. Azusa sits farther northeast. Duarte and Monrovia sit north. Maine Avenue and Ramona Boulevard are the historic commercial spines. Pacific Avenue, Baldwin Park Boulevard, Francisquito Avenue, Garvey Avenue, Puente Avenue, Valley Boulevard, and Los Angeles Street fill in the grid. Text the street so the bid matches City of Baldwin Park for a city address — not an Irwindale or West Covina permit.
Commercial work sits on Maine Avenue, Ramona Boulevard, Pacific Avenue, and Baldwin Park Boulevard. Occupied houses and open shops change the layout — not the stud spec. The 10, the 605, and Ramona traffic change the schedule.
The usual mismatch is treating a Maine Avenue shop wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Baldwin Park Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Baldwin Park, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Baldwin Park, CA
This page is steel and metal stud framing in the City of Baldwin Park — incorporated Los Angeles County lots in 91706 — from our Fairfield shop. City of Baldwin Park Building & Safety is at 14403 Pacific Avenue. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No LADBS permit for a City of Baldwin Park lot. No Los Angeles County Building and Safety permit for an incorporated Baldwin Park address. No claim that every 91706 address is Baldwin Park — that ZIP also lists Irwindale as an alias. No storefront on Maine Avenue. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. West Covina, El Monte, Irwindale, Industry, La Puente, Azusa, Duarte, and other addresses that only sit next to Baldwin Park are different places. This page is the City of Baldwin Park, CA, ZIP 91706 — text the street so the permit office matches the address.
Baldwin Park Metal Stud FAQs
Do you do steel / metal stud framing in Baldwin Park?
Yes. Interior light-gauge metal stud framing in Baldwin Park, CA from our Fairfield shop — partitions, Maine Avenue TIs, Ramona and Pacific interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Baldwin Park a city?
Yes. Baldwin Park is an incorporated city in the San Gabriel Valley of Los Angeles County. The town was first called Vineland. The City of Baldwin Park incorporated on January 25, 1956. It is not a neighborhood of the City of Los Angeles. There is a City of Baldwin Park Building & Safety Division. Permits run through that office, not LADBS.
Is West Covina or El Monte the same as Baldwin Park?
No. West Covina and El Monte are separate incorporated cities and each has its own Building and Safety office. This page is the City of Baldwin Park. Text the street.
Is Irwindale or Industry the same as Baldwin Park?
No. Irwindale sits northeast and can share 91706 mail. Industry and La Puente sit south. Azusa sits farther northeast. Those are different cities and different permit offices. Text the street so the bid matches the right city.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Baldwin Park houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Maine Avenue TIs, rated walls, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Maine Avenue or Ramona Boulevard?
Yes. Occupied retail, restaurant, office, medical, and commercial tenant improvements on Maine Avenue, Ramona Boulevard, Pacific Avenue, and Baldwin Park Boulevard are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Baldwin Park buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. The 10, the 605, and Ramona traffic change the schedule — not the stud spec.
What ZIP does this Baldwin Park page cover?
This page covers City of Baldwin Park street addresses in ZIP 91706. That ZIP also lists Irwindale as an alias. Text the street with the photos so the bid matches City of Baldwin Park Building & Safety — not City of Irwindale.
Do you work Maine Avenue, Ramona Boulevard, and Pacific Avenue?
Yes. Maine Avenue, Ramona Boulevard, Pacific Avenue, Baldwin Park Boulevard, Francisquito Avenue, Garvey Avenue, Puente Avenue, Valley Boulevard, Los Angeles Street, and other City of Baldwin Park addresses are on this framing page. Text the street with the photos.
Who issues the permit in Baldwin Park?
City of Baldwin Park Building & Safety Division. 14403 Pacific Avenue, Baldwin Park, CA 91706. Call (626) 813-5265. Inspections: (626) 813-5267. The Los Angeles County Public Works office at 14747 East Ramona Boulevard is a different office. City of West Covina, City of El Monte, and City of Irwindale are different offices.
How much does metal stud framing cost in Baldwin Park?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work at a City of Baldwin Park address uses City of Baldwin Park Building & Safety — not LADBS and not Los Angeles County Building and Safety unless the lot is outside city limits.
Need Baldwin Park Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099