Bakersfield, CA 93301 • Kern County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Bakersfield, CA
Light-gauge steel and metal stud framing in Bakersfield — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: downtown Chester and Truxtun shops, California Avenue and Ming Avenue interiors, Stockdale Highway and Rosedale Highway offices, and house remodels inside city limits.
Bakersfield Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Chester Avenue storefront. Bakersfield is an incorporated city in Kern County. It is not Oildale, not Arvin, and not unincorporated Kern County that still uses a Bakersfield mailing name. This page is steel / metal stud framing at City of Bakersfield addresses — Chester Avenue, Truxtun Avenue, California Avenue, Ming Avenue, Stockdale Highway, and Rosedale Highway. It is not Arvin, Lamont, Oildale, Shafter, or Taft.
Text “Bakersfield” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Bakersfield
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls inside city limits. This is the skeleton the board hangs on.
Downtown Chester and Truxtun TIs
Shop, restaurant, office, and civic-adjacent build-outs on Chester Avenue and Truxtun Avenue when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
California, Ming, Stockdale, and Rosedale interiors
Shop partitions, medical suites, and office interiors on California Avenue, Ming Avenue, Stockdale Highway, Rosedale Highway, Union Avenue, White Lane, Gosford Road, and Coffee Road.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Bakersfield house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Bakersfield Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Downtown TI, Stockdale office, Ming shop, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, office TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Bakersfield house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Bakersfield Streets, ZIP, and Permits
Bakersfield is an incorporated city in Kern County. City street ZIPs on this page include 93301, 93304, 93305, 93306, 93307, 93309, 93311, 93312, 93313, and 93314. 93302 and 93303 are P.O. Boxes. 93308 also covers unincorporated Oildale — text the street. Area code is 661. City permits run through Bakersfield Development Services / Building Division at 1715 Chester Avenue, Bakersfield, CA 93301. Call (661) 326-3720. Planning: (661) 326-3733. Hours are Monday–Friday 8:00 AM–5:00 PM. Website: bakersfieldcity.us. Unincorporated Bakersfield mailing addresses use Kern County Building Inspection, not City Hall. Text the street so the bid matches City of Bakersfield — not Arvin, Lamont, Oildale, Shafter, or Taft.
Chester Avenue and Truxtun Avenue carry a lot of the downtown work. California Avenue, Ming Avenue, Stockdale Highway, Rosedale Highway, Union Avenue, White Lane, Gosford Road, Coffee Road, Calloway Drive, and Brundage Lane show up on a lot of plans. Occupied houses and open offices change the layout — not the stud spec.
The usual mismatch is treating a Stockdale Highway tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Bakersfield Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Bakersfield, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Bakersfield, CA
This page is steel and metal stud framing in Bakersfield — City of Bakersfield, Kern County — from our Fairfield shop. Building Division is at 1715 Chester Avenue. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No claim that every Bakersfield mailing address is inside the city. Oildale and other unincorporated pockets permit through Kern County. No storefront on Chester Avenue. No structural steel building. No promise that metal studs hold the building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Arvin, Lamont, Oildale, Shafter, and Taft are different places. This page is City of Bakersfield, CA.
Bakersfield Metal Stud FAQs
Do you do steel / metal stud framing in Bakersfield?
Yes. Interior light-gauge metal stud framing in Bakersfield, CA from our Fairfield shop — partitions, downtown Chester and Truxtun TIs, California and Ming interiors, Stockdale and Rosedale offices, house walls, soffits, and frame-and-hang.
Is every Bakersfield address in the City of Bakersfield?
No. Oildale and other unincorporated pockets use a Bakersfield mailing name but permit through Kern County Building Inspection. City jobs go to 1715 Chester Avenue.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Bakersfield houses use metal studs or wood?
Most house walls here are still wood. Metal wins on downtown TIs, Stockdale offices, Ming shops, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop downtown on Chester?
Yes. Occupied retail, restaurant, office, and medical tenant improvements on Chester Avenue and Truxtun Avenue are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Bakersfield buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open office. A full TI is still a construction job — plan rooms.
Is Bakersfield the same as Arvin or Oildale?
No. Arvin is its own city to the southeast. Oildale is unincorporated north of the Kern River. Lamont, Shafter, and Taft are different places. Text the street so the bid matches City of Bakersfield.
Do you work Chester, Truxtun, California, Ming, and Stockdale?
Yes. Chester Avenue, Truxtun Avenue, California Avenue, Ming Avenue, Stockdale Highway, Rosedale Highway, Union Avenue, White Lane, Gosford Road, Coffee Road, Calloway Drive, Brundage Lane, and other city addresses are on this framing page. Text the street with the photos.
What ZIP does this Bakersfield page cover?
City street ZIPs include 93301, 93304, 93305, 93306, 93307, 93309, 93311, 93312, 93313, and 93314. 93308 also covers unincorporated Oildale. Text the street with the photos so the bid matches the city address.
Who issues the permit in Bakersfield?
City of Bakersfield Development Services / Building Division, 1715 Chester Avenue, Bakersfield, CA 93301. Call (661) 326-3720. Unincorporated Bakersfield mailing addresses use Kern County Building Inspection.
How much does metal stud framing cost in Bakersfield?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Bakersfield Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099