Arcadia, CA 91006 • 91007 • Incorporated City • San Gabriel Valley • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Arcadia, CA
Light-gauge steel and metal stud framing in Arcadia — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Huntington Drive shops, Baldwin Avenue interiors, and house remodels in 91006 and 91007.
Arcadia Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield — a San Gabriel Valley run, not a Huntington Drive storefront. Arcadia is an incorporated city at the foot of the San Gabriel Mountains. It is not a neighborhood of the City of Los Angeles. Elias “Lucky” Baldwin founded the city. The City of Arcadia incorporated on August 17, 1903. Monrovia, Pasadena, Temple City, and Sierra Madre are different cities. Street ZIPs are 91006 and 91007. PO boxes use 91066 and 91077. This page is steel / metal stud framing at City of Arcadia addresses — Huntington Drive, Baldwin Avenue, Santa Anita Avenue, and First Avenue. The street decides the bid.
Text “Arcadia” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Arcadia
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls at City of Arcadia 91006 and 91007 addresses. This is the skeleton the board hangs on.
Huntington Drive TIs
Shop, restaurant, office, medical, and commercial build-outs on Huntington Drive when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Baldwin, Santa Anita, and First Avenue interiors
Occupied shops and commercial walls on Baldwin Avenue, Santa Anita Avenue, First Avenue, and Duarte Road. Occupied buildings change the layout — not the stud spec.
House remodel partitions
New interior steel walls inside an existing Arcadia house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on an Arcadia Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Huntington Drive TI, Baldwin Avenue shop, rated walls, or a finish that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, shop TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Arcadia house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Arcadia Streets, ZIP, and Permits
Arcadia is an incorporated city in the San Gabriel Valley of Los Angeles County — not a City of Los Angeles neighborhood. There is a City of Arcadia Building Services Division. LADBS does not issue permits inside city limits. Street ZIPs are 91006 and 91007. PO boxes use 91066 and 91077. Area code is 626. Text the street so the bid matches City of Arcadia Building Services at 240 West Huntington Drive — not City of Monrovia, not City of Pasadena, not City of Temple City, and not Los Angeles County Building and Safety for an unincorporated lot next door.
Permits for City of Arcadia addresses run through City of Arcadia Development Services, Building Services Division: 240 West Huntington Drive, Arcadia, CA 91007. Call (626) 574-5416. Inspections also run through the EDGE portal and (626) 574-5417 / (626) 574-5418. Website is arcadiaca.gov. City of Monrovia, City of Pasadena, City of Temple City, City of Sierra Madre, and City of Duarte are different offices.
Monrovia sits east. Sierra Madre sits northwest. Temple City sits southwest. Pasadena sits west. Duarte sits east. El Monte sits south. Huntington Drive — historic Route 66 — and Baldwin Avenue are the main commercial spines. Santa Anita Avenue, First Avenue, Duarte Road, Colorado Boulevard, and Wheeler Avenue fill in the grid. Text the street so the bid matches City of Arcadia for a city address — not a Monrovia or Temple City permit.
Commercial work sits on Huntington Drive, Baldwin Avenue, Santa Anita Avenue, and First Avenue. Occupied houses and open shops change the layout — not the stud spec. The 210, Huntington Drive, and Santa Anita race-day traffic change the schedule.
The usual mismatch is treating a Huntington Drive shop wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How an Arcadia Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Arcadia, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Arcadia, CA
This page is steel and metal stud framing in the City of Arcadia — incorporated Los Angeles County lots in 91006 and 91007 — from our Fairfield shop. City of Arcadia Building Services is at 240 West Huntington Drive. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No LADBS permit for a City of Arcadia lot. No Los Angeles County Building and Safety permit for an incorporated Arcadia address. No claim that 91024 is Arcadia — that ZIP is Sierra Madre. No storefront on Huntington Drive. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Monrovia, Pasadena, Temple City, Sierra Madre, Duarte, El Monte, San Marino, and other addresses that only sit next to Arcadia are different places. This page is the City of Arcadia, CA, ZIPs 91006 and 91007 — text the street so the permit office matches the address.
Arcadia Metal Stud FAQs
Do you do steel / metal stud framing in Arcadia?
Yes. Interior light-gauge metal stud framing in Arcadia, CA from our Fairfield shop — partitions, Huntington Drive TIs, Baldwin and Santa Anita interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Arcadia a city?
Yes. Arcadia is an incorporated city in the San Gabriel Valley of Los Angeles County. Elias “Lucky” Baldwin founded the city. The City of Arcadia incorporated on August 17, 1903. It is not a neighborhood of the City of Los Angeles. There is a City of Arcadia Building Services Division. Permits run through that office, not LADBS.
Is Monrovia or Pasadena the same as Arcadia?
No. Monrovia and Pasadena are separate incorporated cities and each has its own Building and Safety office. This page is the City of Arcadia. Text the street.
Is Temple City, Sierra Madre, or Duarte the same as Arcadia?
No. Temple City sits southwest. Sierra Madre sits northwest. Duarte sits east. El Monte sits south. Those are different cities and different permit offices. Text the street so the bid matches the right city.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Arcadia houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Huntington Drive TIs, rated walls, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Huntington Drive or Baldwin Avenue?
Yes. Occupied retail, restaurant, office, medical, and commercial tenant improvements on Huntington Drive, Baldwin Avenue, Santa Anita Avenue, and First Avenue are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Arcadia buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. The 210, Huntington Drive, and Santa Anita race-day traffic change the schedule — not the stud spec.
What ZIP does this Arcadia page cover?
This page covers City of Arcadia street addresses in ZIP 91006 and 91007. PO boxes use 91066 and 91077. 91024 is Sierra Madre. Text the street with the photos so the bid matches City of Arcadia Building Services.
Do you work Huntington Drive, Baldwin Avenue, and Santa Anita Avenue?
Yes. Huntington Drive, Baldwin Avenue, Santa Anita Avenue, First Avenue, Duarte Road, Colorado Boulevard, Wheeler Avenue, and other City of Arcadia addresses are on this framing page. Text the street with the photos.
Who issues the permit in Arcadia?
City of Arcadia Building Services Division. 240 West Huntington Drive, Arcadia, CA 91007. Call (626) 574-5416. City of Monrovia, City of Pasadena, City of Temple City, and City of Sierra Madre are different offices.
How much does metal stud framing cost in Arcadia?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work at a City of Arcadia address uses City of Arcadia Building Services — not LADBS and not Los Angeles County Building and Safety unless the lot is outside city limits.
Need Arcadia Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099