Agoura Hills, CA 91301 • Incorporated City • Conejo Valley • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Agoura Hills, CA
Light-gauge steel and metal stud framing in Agoura Hills — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Kanan Road shops, Agoura Road interiors, and house remodels in 91301.
Agoura Hills Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield — a Conejo Valley run, not a Kanan Road storefront. Agoura Hills is an incorporated city in Los Angeles County, in the eastern Conejo Valley between the Simi Hills and the Santa Monica Mountains. It is not a neighborhood of the City of Los Angeles. The City of Agoura Hills incorporated on December 8, 1982. Calabasas, Westlake Village, and Oak Park are different places. The street ZIP is 91301. PO boxes use 91376. 91301 also covers unincorporated Agoura, Cornell, and Malibu Lake. This page is steel / metal stud framing at City of Agoura Hills addresses — Kanan Road, Agoura Road, Reyes Adobe Road, and Thousand Oaks Boulevard. The street decides the bid.
Text “Agoura Hills” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Agoura Hills
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls at City of Agoura Hills 91301 addresses. This is the skeleton the board hangs on.
Kanan Road and Agoura Road TIs
Shop, restaurant, office, medical, and commercial build-outs on Kanan Road and Agoura Road when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Reyes Adobe and Thousand Oaks Boulevard interiors
Occupied shops and commercial walls on Reyes Adobe Road, Thousand Oaks Boulevard, Chesebro Road, and Lindero Canyon Road. Occupied buildings change the layout — not the stud spec.
House remodel partitions
New interior steel walls inside an existing Agoura Hills house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on an Agoura Hills Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Kanan Road TI, Agoura Road shop, rated walls, or a finish that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, shop TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Agoura Hills house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Agoura Hills Streets, ZIP, and Permits
Agoura Hills is an incorporated city in Los Angeles County — not a City of Los Angeles neighborhood and not unincorporated Agoura. There is a City of Agoura Hills Building & Safety Division. LADBS does not issue permits inside city limits. The street ZIP is 91301. PO boxes use 91376. 91301 also covers unincorporated Agoura, Cornell, and Malibu Lake. Oak Park uses 91377 and sits in unincorporated Ventura County. Area codes are 818 and 747. Text the street so the bid matches City of Agoura Hills Building & Safety at 30001 Ladyface Court — not City of Calabasas, not City of Westlake Village, and not Los Angeles County or Ventura County Building and Safety.
Permits for City of Agoura Hills addresses run through City of Agoura Hills Building & Safety Division: 30001 Ladyface Court, Agoura Hills, CA 91301. Call (818) 597-7334. Email: Permits@AgouraHillsCity.org. Website is agourahillscity.gov. Counter hours are Monday through Thursday, 7:00 a.m. to 5:00 p.m., and Friday, 7:00 a.m. to 4:00 p.m. Unincorporated Agoura, Cornell, and Malibu Lake use Los Angeles County Building and Safety. Oak Park uses Ventura County. City of Calabasas, City of Westlake Village, and City of Thousand Oaks are different offices.
Calabasas sits east. Westlake Village sits west. Oak Park sits north, in Ventura County. Thousand Oaks sits farther west. Unincorporated Agoura sits next to the city limits. Kanan Road, Agoura Road, Reyes Adobe Road, Thousand Oaks Boulevard, Chesebro Road, Lindero Canyon Road, and Liberty Canyon Road fill in the grid. Text the street so the bid matches City of Agoura Hills for a city address — not a Calabasas or Oak Park permit that only shares a border or a ZIP alias.
Commercial work sits on Kanan Road, Agoura Road, and Thousand Oaks Boulevard. Occupied houses and open shops change the layout — not the stud spec. The 101 and Kanan Road traffic change the schedule.
The usual mismatch is treating an Agoura Road shop wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How an Agoura Hills Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Agoura Hills, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Agoura Hills, CA
This page is steel and metal stud framing in the City of Agoura Hills — incorporated Los Angeles County lots in 91301 — from our Fairfield shop. City of Agoura Hills Building & Safety is at 30001 Ladyface Court. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No LADBS permit for a City of Agoura Hills lot. No Los Angeles County Building and Safety permit for an incorporated Agoura Hills address. Unincorporated Agoura, Cornell, and Malibu Lake are County, not this city. No claim that every 91301 address is Agoura Hills. Oak Park is unincorporated Ventura County and uses 91377. No storefront on Kanan Road. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Calabasas, Westlake Village, Oak Park, Thousand Oaks, and other addresses that only sit next to Agoura Hills are different places. This page is the City of Agoura Hills, CA, ZIP 91301 — text the street so the permit office matches the address.
Agoura Hills Metal Stud FAQs
Do you do steel / metal stud framing in Agoura Hills?
Yes. Interior light-gauge metal stud framing in Agoura Hills, CA from our Fairfield shop — partitions, Kanan Road and Agoura Road TIs, Reyes Adobe interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Agoura Hills a city?
Yes. Agoura Hills is an incorporated city in Los Angeles County. The City of Agoura Hills incorporated on December 8, 1982. It is not a neighborhood of the City of Los Angeles. There is a City of Agoura Hills Building & Safety Division. Permits run through that office, not LADBS.
Is Calabasas or Westlake Village the same as Agoura Hills?
No. Calabasas sits east and uses 91302. Westlake Village sits west. Each is a separate incorporated city with its own Building and Safety office. This page is the City of Agoura Hills. Text the street.
Is Oak Park or unincorporated Agoura the same as Agoura Hills?
No. Oak Park is unincorporated Ventura County and uses 91377. Unincorporated Agoura, Cornell, and Malibu Lake sit next to the city and use Los Angeles County Building and Safety. Those are different permit offices. Text the street.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Agoura Hills houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Kanan Road and Agoura Road TIs, rated walls, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Kanan Road or Agoura Road?
Yes. Occupied retail, restaurant, office, medical, and commercial tenant improvements on Kanan Road, Agoura Road, and Thousand Oaks Boulevard are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Agoura Hills buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. The 101 and Kanan Road traffic change the schedule — not the stud spec.
What ZIP does this Agoura Hills page cover?
This page covers City of Agoura Hills street addresses in ZIP 91301. PO boxes use 91376. 91301 also covers unincorporated Agoura, Cornell, and Malibu Lake. Oak Park uses 91377. Text the street with the photos so the bid matches City of Agoura Hills Building & Safety.
Do you work Kanan Road, Agoura Road, and Reyes Adobe Road?
Yes. Kanan Road, Agoura Road, Reyes Adobe Road, Thousand Oaks Boulevard, Chesebro Road, Lindero Canyon Road, Liberty Canyon Road, and other City of Agoura Hills addresses are on this framing page. Text the street with the photos.
Who issues the permit in Agoura Hills?
City of Agoura Hills Building & Safety Division. 30001 Ladyface Court, Agoura Hills, CA 91301. Call (818) 597-7334. Unincorporated Agoura uses Los Angeles County Building and Safety. City of Calabasas, City of Westlake Village, and Ventura County are different offices.
How much does metal stud framing cost in Agoura Hills?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work at a City of Agoura Hills address uses City of Agoura Hills Building & Safety — not LADBS and not Los Angeles County Building and Safety unless the lot is outside city limits.
Need Agoura Hills Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099