San Ramon, CA 94583 • Contra Costa County • Incorporated • Bishop Ranch • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in San Ramon, CA
Light-gauge steel and metal stud framing in San Ramon — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Bishop Ranch offices, Bollinger Canyon shops, and house remodels in 94583.
San Ramon Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Bishop Ranch storefront. San Ramon is an incorporated Contra Costa County city on I-680. This page is steel / metal stud framing in San Ramon, CA — Bollinger Canyon Road, Crow Canyon Road, and Bishop Ranch. It is not Danville or Dublin.
Text “San Ramon” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in San Ramon
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 94583 and 94582. This is the skeleton the board hangs on.
Tenant improvement framing
Office, retail, and restaurant build-outs in Bishop Ranch and along Bollinger Canyon when the drawing says steel studs. San Ramon is a commercial city as well as a house city — if the plan names metal, that is the bid. Commercial framing →
Bishop Ranch, Bollinger Canyon, and Crow Canyon interiors
Office partitions, City Center shops, and rated assemblies on Bollinger Canyon Road, Crow Canyon Road, Camino Ramon, and other San Ramon addresses.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing San Ramon house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a San Ramon Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Bishop Ranch TI, Bollinger Canyon shops, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, office interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most house walls in Dougherty Valley and the hillside neighborhoods with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
San Ramon Streets, ZIPs, and Permits
San Ramon is an incorporated city in Contra Costa County. The primary delivery ZIP on this page is 94583. Dougherty Valley and some east-side addresses use 94582. It uses the 925 area code. Permits inside city limits run through the City of San Ramon Building and Safety Services at 7000 Bollinger Canyon Road, San Ramon, CA 94583. Danville is 510 La Gonda Way. Dublin is Alameda County. Text the street so the bid matches the desk.
Bollinger Canyon Road is the City Hall and Bishop Ranch corridor off I-680. Crow Canyon Road is the other east-west spine. Camino Ramon runs through the office park. Occupied offices, City Center TIs, and house remodels change the layout — not the stud spec. HOA review can sit in front of the building permit in some neighborhoods.
The usual mismatch is treating a Bishop Ranch tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a house up. Occupied houses, open shops, and after-hours offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a San Ramon Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 San Ramon, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, Bishop Ranch suite, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
San Ramon, CA
This page is steel and metal stud framing in San Ramon — ZIP 94583 — from our Fairfield shop. Permits inside city limits run through 7000 Bollinger Canyon Road. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide → · Commercial: Commercial framing →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake San Ramon address. No claim that we keep a shop in Bishop Ranch. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Danville and Dublin are different places. This page is San Ramon, CA 94583.
San Ramon Metal Stud FAQs
Do you do steel / metal stud framing in San Ramon?
Yes. Interior light-gauge metal stud framing in San Ramon, CA from our Fairfield shop — partitions, Bishop Ranch and Bollinger Canyon TIs, house interiors, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do San Ramon houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Bishop Ranch TIs, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame an office in Bishop Ranch?
Yes. Occupied office and retail TIs in Bishop Ranch and along Bollinger Canyon Road are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied San Ramon buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open City Center shop, or an after-hours Bishop Ranch office. A full TI is still a construction job — plan rooms.
Do you work Bollinger Canyon, Crow Canyon, and Bishop Ranch?
Yes. Bollinger Canyon Road, Crow Canyon Road, Camino Ramon, Bishop Ranch, and other San Ramon addresses in 94583 and 94582 are on this framing page. Text the street with the photos.
What ZIPs does this San Ramon page cover?
94583 and 94582. Text the street with the photos so the bid matches the San Ramon address — not Danville or Dublin.
Who issues the permit in San Ramon?
City of San Ramon Building and Safety Services at 7000 Bollinger Canyon Road, San Ramon, CA 94583. San Ramon is incorporated and has its own building desk. Danville is 510 La Gonda Way. Dublin is a different county.
How much does metal stud framing cost in San Ramon?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need San Ramon Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099