Roseville, CA 95661 / 95678 / 95747 • Incorporated 1909 • Placer County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Roseville, CA
Light-gauge steel and metal stud framing in Roseville — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Vernon Street and Historic Old Town shops, Galleria and Douglas Boulevard interiors, and west Roseville house remodels.
Roseville Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield — a Sacramento Valley run, not a Vernon Street storefront. Roseville is an incorporated city in Placer County — not Rocklin, not Lincoln, not Granite Bay, and not Antelope. It has its own Building Division at 311 Vernon Street. City street ZIPs are 95661, 95678, and 95747. 95746 is Granite Bay. 95677 and 95765 are Rocklin. 95648 is Lincoln. 95843 is Antelope in Sacramento County. A “Roseville” mailing line can sit outside city limits. This page is steel / metal stud framing at City of Roseville addresses — Vernon Street, Atlantic Street, Douglas Boulevard, Harding / Galleria, and Pleasant Grove. The street decides the bid.
Text “Roseville” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Roseville
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls at City of Roseville addresses. This is the skeleton the board hangs on.
Vernon Street and Old Town TIs
Restaurant, shop, office, and commercial build-outs on Vernon Street, Atlantic Street, Lincoln Street, and Historic Old Town when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Galleria, Douglas, and Harding interiors
Retail, medical, office, and occupied-building partitions on Douglas Boulevard, Harding Boulevard, Galleria Boulevard, Roseville Parkway, and Sunrise Avenue. Occupied buildings change the layout — not the stud spec.
West Roseville house remodel partitions
New interior steel walls inside an existing Roseville house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Pleasant Grove and Blue Oaks streets change the layout — not the stud spec. Metal vs wood →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Roseville Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Vernon Street TI, Galleria shop, rated walls, or a finish that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, medical suites, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Roseville house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete, brick, or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Roseville Streets, ZIP, and Permits
Roseville is an incorporated city in Placer County — the largest city in the county, on Interstate 80 and State Route 65. The City of Roseville incorporated on April 10, 1909. This page uses City of Roseville street ZIPs 95661, 95678, and 95747. 95746 is Granite Bay. 95677 and 95765 are Rocklin. 95648 is Lincoln. Area codes are 916 and 279. Text the street so the bid matches City of Roseville Building Division — not City of Rocklin Building at 3970 Rocklin Road, not City of Lincoln Building at 600 6th Street, not Placer County Building at 3091 County Center Drive in Auburn for an unincorporated lot, and not Sacramento County Building for an Antelope 95843 lot.
Permits for City of Roseville addresses run through City of Roseville Building Division, Development Services, 311 Vernon Street, Roseville, CA 95678. Call (916) 774-5332. Email: buildingdivision@roseville.ca.us. City site is roseville.ca.us. A Roseville mailing ZIP on an unincorporated Placer County parcel uses Placer County Building — a different office. Greater Roseville is not the same as city limits. The city itself says some homes use a Roseville mailing address and sit outside the municipal boundary.
Rocklin sits north. Lincoln sits northwest. Granite Bay sits east. Citrus Heights and Antelope sit south across the Sacramento County line. I-80 cuts the older east side. Highway 65 serves the north and west. Vernon Street and Atlantic Street are downtown. Douglas Boulevard and Harding / Galleria are the big commercial pair. Pleasant Grove Boulevard, Blue Oaks Boulevard, Fiddyment Road, and Roseville Parkway serve west and north Roseville. Text the street so the bid matches City of Roseville for a city address — not a Granite Bay 95746 permit path, and not a Rocklin 95677 / 95765 permit.
Commercial work sits on Vernon Street, Atlantic Street, Douglas Boulevard, Harding Boulevard, Galleria Boulevard, Roseville Parkway, Sunrise Avenue, Pleasant Grove Boulevard, Foothills Boulevard, Washington Boulevard, Cirby Way, and Riverside Avenue. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a Vernon Street shop wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Roseville Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Roseville, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Roseville, CA
This page is steel and metal stud framing in Roseville — City of Roseville lots in 95661, 95678, and 95747 — from our Fairfield shop. City Building Division is at 311 Vernon Street. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No City of Rocklin permit at 3970 Rocklin Road. No City of Lincoln permit at 600 6th Street. No Placer County Building permit at 3091 County Center Drive, Auburn, for a City of Roseville lot. No claim that every Roseville mailing address is inside city limits — some unincorporated Placer County parcels use a Roseville post office line. No Granite Bay 95746 page. No Antelope 95843 page. No Citrus Heights page. No storefront on Vernon Street. No structural steel building. No promise that metal studs hold the building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Rocklin, Lincoln, Granite Bay, Antelope, and other addresses that only share I-80 or Highway 65 are different places. This page is Roseville, CA, City of Roseville — text the street so the permit office matches the address.
Roseville Metal Stud FAQs
Do you do steel / metal stud framing in Roseville?
Yes. Interior light-gauge metal stud framing in Roseville, CA from our Fairfield shop — partitions, Vernon Street and Galleria TIs, Douglas and Harding interiors, west Roseville house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Roseville a city?
Yes. The City of Roseville incorporated on April 10, 1909. Building permits inside city limits run through City of Roseville Building Division at 311 Vernon Street — not Rocklin, not Lincoln, not Granite Bay, and not Placer County Building in Auburn.
Is every Roseville mailing address inside city limits?
No. The U.S. Postal Service can put “Roseville” on an unincorporated Placer County parcel. Those lots use Placer County Building at 3091 County Center Drive in Auburn — not this City of Roseville page. Text the street.
Is Rocklin the same as Roseville?
No. Rocklin is a separate incorporated city. It uses ZIPs 95677 and 95765 and City of Rocklin Building at 3970 Rocklin Road. A Stanford Ranch or Highway 65 address can sit one city over. Text the street so the permit office matches.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Roseville houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Vernon Street and Galleria TIs, rated walls, medical suites, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Vernon Street, Douglas, or near the Galleria?
Yes. Occupied retail, restaurant, office, medical, and commercial tenant improvements on Vernon Street, Atlantic Street, Douglas Boulevard, Harding Boulevard, Galleria Boulevard, and Roseville Parkway are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Roseville buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. I-80 and Highway 65 traffic change the schedule — not the stud spec.
What ZIPs does this Roseville page cover?
This page covers City of Roseville street addresses in 95661, 95678, and 95747. 95746 is Granite Bay. 95677 and 95765 are Rocklin. 95648 is Lincoln. 95843 is Antelope. Text the street with the photos so the bid matches City of Roseville Building Division.
Do you work Vernon, Douglas, Harding, Galleria, and Pleasant Grove?
Yes. Vernon Street, Atlantic Street, Douglas Boulevard, Harding Boulevard, Galleria Boulevard, Roseville Parkway, Sunrise Avenue, Pleasant Grove Boulevard, Blue Oaks Boulevard, Foothills Boulevard, Washington Boulevard, Cirby Way, Riverside Avenue, and other City of Roseville addresses are on this framing page. Text the street with the photos.
Who issues the permit in Roseville?
City of Roseville Building Division, 311 Vernon Street, Roseville, CA 95678. Call (916) 774-5332. Email buildingdivision@roseville.ca.us. City of Rocklin Building is a different office. City of Lincoln Building is a different office. Placer County Building in Auburn is a different office for unincorporated parcels. Sacramento County Building is a different office for Antelope.
How much does metal stud framing cost in Roseville?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work at a City of Roseville address uses City of Roseville Building Division — not Rocklin, not Lincoln, and not Placer County Building unless the lot is unincorporated.
Need Roseville Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099
