Rocklin, CA 95677 / 95765 • Incorporated 1893 • Placer County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Rocklin, CA
Light-gauge steel and metal stud framing in Rocklin — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Pacific Street and Quarry District shops, Granite Drive and Stanford Ranch interiors, and Sunset / Whitney Ranch house remodels.
Rocklin Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield — a Sacramento Valley run, not a Pacific Street storefront. Rocklin is an incorporated city in Placer County — not Roseville, not Lincoln, and not Loomis. It has its own Building Division at 3970 Rocklin Road. City street ZIPs are 95677 and 95765. 95678 and 95661 are Roseville. 95648 is Lincoln. 95650 is Loomis. 95746 is Granite Bay. ZIP 95765 can touch a Lincoln or Roseville lot at the edge. This page is steel / metal stud framing at City of Rocklin addresses — Pacific Street, Rocklin Road, Granite Drive, Stanford Ranch Road, and Sunset Boulevard. The street decides the bid.
Text “Rocklin” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Rocklin
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls at City of Rocklin addresses. This is the skeleton the board hangs on.
Pacific Street and Quarry District TIs
Restaurant, shop, office, and commercial build-outs on Pacific Street, Rocklin Road, Grove Street, and the Historic Quarry District when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Granite Drive and Stanford Ranch interiors
Retail, auto-row, office, and occupied-building partitions on Granite Drive, Stanford Ranch Road, Sunset Boulevard, Sierra College Boulevard, and Lonetree Boulevard. Occupied buildings change the layout — not the stud spec.
Sunset and Whitney Ranch house partitions
New interior steel walls inside an existing Rocklin house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Tract streets change the layout — not the stud spec. Metal vs wood →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Rocklin Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Pacific Street TI, Granite Drive shop, rated walls, or a finish that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, medical suites, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Rocklin house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete, brick, granite, or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Rocklin Streets, ZIP, and Permits
Rocklin is an incorporated city in Placer County — the City of Granite, about six miles northeast of Roseville on Interstate 80 and Highway 65. The City of Rocklin incorporated on February 24, 1893. This page uses City of Rocklin street ZIPs 95677 and 95765. 95677 covers older Rocklin, Pacific Street, and the Quarry District. 95765 covers Stanford Ranch, Whitney Ranch, and Sunset. Area codes are 916 and 279. Text the street so the bid matches City of Rocklin Building Division — not City of Roseville Building at 311 Vernon Street, not City of Lincoln Building at 600 6th Street, not Town of Loomis Building at 3665 Taylor Road, and not Placer County Building at 3091 County Center Drive in Auburn for an unincorporated lot.
Permits for City of Rocklin addresses run through City of Rocklin Building Division, 3970 Rocklin Road, 1st Floor, Rocklin, CA 95677. Call (916) 625-5120. Email: building@rocklin.ca.us. Inspection line: (916) 625-5136. City site is rocklin.ca.us. A 95765 mailing ZIP on the Lincoln or Roseville edge of the map can sit outside Rocklin city limits. Greater Rocklin is not the same as city limits.
Roseville sits south. Lincoln sits northwest. Loomis sits east. Granite Bay sits southeast. I-80 runs the east side. Highway 65 serves the west side. Pacific Street and Rocklin Road are the older commercial pair. Granite Drive is the I-80 auto and retail row. Stanford Ranch Road, Sunset Boulevard, Sierra College Boulevard, and Lonetree Boulevard carry west Rocklin shops and houses. Text the street so the bid matches City of Rocklin for a city address — not a Roseville 95678 permit, and not a Lincoln 95648 permit.
Commercial work sits on Pacific Street, Rocklin Road, Granite Drive, Stanford Ranch Road, Sunset Boulevard, Sierra College Boulevard, Lonetree Boulevard, Five Star Boulevard, Cincinnati Avenue, and Grove Street. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a Pacific Street shop wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Rocklin Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Rocklin, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Rocklin, CA
This page is steel and metal stud framing in Rocklin — City of Rocklin lots in 95677 and 95765 — from our Fairfield shop. City Building Division is at 3970 Rocklin Road. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No City of Roseville permit at 311 Vernon Street. No City of Lincoln permit at 600 6th Street. No Town of Loomis permit at 3665 Taylor Road. No Placer County Building permit at 3091 County Center Drive, Auburn, for a City of Rocklin lot. No claim that every 95765 address is inside Rocklin city limits — that ZIP can touch Lincoln and Roseville at the edge. No Granite Bay 95746 page. No storefront on Pacific Street. No structural steel building. No promise that metal studs hold the building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Roseville, Lincoln, Loomis, and other addresses that only share Highway 65 or I-80 are different places. This page is Rocklin, CA, City of Rocklin — text the street so the permit office matches the address.
Rocklin Metal Stud FAQs
Do you do steel / metal stud framing in Rocklin?
Yes. Interior light-gauge metal stud framing in Rocklin, CA from our Fairfield shop — partitions, Pacific Street and Quarry District TIs, Granite Drive and Stanford Ranch interiors, Sunset and Whitney Ranch house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Rocklin a city?
Yes. The City of Rocklin incorporated on February 24, 1893. Building permits inside city limits run through City of Rocklin Building Division at 3970 Rocklin Road — not Roseville, not Lincoln, not Loomis, and not Placer County Building in Auburn.
Is Rocklin the same as Roseville?
No. Rocklin is a separate incorporated city. Roseville uses ZIPs 95661, 95678, and 95747 and City of Roseville Building at 311 Vernon Street. A Highway 65 or Stanford Ranch address can sit one city over. Text the street.
Does 95765 always mean City of Rocklin?
No. 95765 is a Rocklin ZIP, but the map edge can include a Lincoln or Roseville lot. 95677 is the older Rocklin ZIP. Text the street so the bid matches City of Rocklin Building — not Lincoln, and not Roseville.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Rocklin houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Pacific Street and Granite Drive TIs, rated walls, medical suites, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Pacific Street, Granite Drive, or Stanford Ranch?
Yes. Occupied retail, restaurant, office, auto-row, and commercial tenant improvements on Pacific Street, Granite Drive, Stanford Ranch Road, Sunset Boulevard, and Sierra College Boulevard are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Rocklin buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. I-80 and Highway 65 traffic change the schedule — not the stud spec.
What ZIPs does this Rocklin page cover?
This page covers City of Rocklin street addresses in 95677 and 95765. 95678 and 95661 are Roseville. 95648 is Lincoln. 95650 is Loomis. 95746 is Granite Bay. Text the street with the photos so the bid matches City of Rocklin Building Division.
Do you work Pacific, Granite Drive, Stanford Ranch, and Sunset?
Yes. Pacific Street, Rocklin Road, Granite Drive, Stanford Ranch Road, Sunset Boulevard, Sierra College Boulevard, Lonetree Boulevard, Five Star Boulevard, Cincinnati Avenue, Grove Street, and other City of Rocklin addresses are on this framing page. Text the street with the photos.
Who issues the permit in Rocklin?
City of Rocklin Building Division, 3970 Rocklin Road, 1st Floor, Rocklin, CA 95677. Call (916) 625-5120. Email building@rocklin.ca.us. City of Roseville Building is a different office. City of Lincoln Building is a different office. Town of Loomis Building is a different office. Placer County Building in Auburn is a different office for unincorporated parcels.
How much does metal stud framing cost in Rocklin?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work at a City of Rocklin address uses City of Rocklin Building Division — not Roseville, not Lincoln, and not Placer County Building unless the lot is unincorporated.
Need Rocklin Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099
