Patterson, CA 95363 • Stanislaus County • West Side • Incorporated 1919 • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Patterson, CA
Light-gauge steel and metal stud framing in Patterson — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Plaza shops, Las Palmas and Sperry Avenue interiors, and house remodels in 95363.
Patterson Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Patterson storefront. Patterson is an incorporated Stanislaus County city on the West Side — December 22, 1919. This page is steel / metal stud framing in Patterson, CA — the Plaza, Las Palmas Avenue, Sperry Avenue, Del Puerto Avenue, and Highway 33 / 2nd Street.
Text “Patterson” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Patterson
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 95363. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, and shop build-outs on Las Palmas Avenue and along Sperry Avenue when the drawing says steel studs. Patterson is a West Side city with a circular downtown and an I-5 corridor — if the plan names metal, that is the bid. Commercial framing →
Plaza, Las Palmas, and Sperry interiors
Shop partitions, restaurant walls, and rated assemblies on the Plaza, Las Palmas Avenue, Sperry Avenue, Del Puerto Avenue, and Highway 33 / 2nd Street in Patterson.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Patterson house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Patterson Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Plaza TI, Las Palmas and Sperry shops, Keystone Pacific suites, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, office interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most house walls off Ward Avenue, Baldwin Road, Salado Avenue, and the neighborhood streets with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Patterson Streets, ZIPs, and Permits
Patterson is an incorporated city on the West Side of Stanislaus County — December 22, 1919. The delivery ZIP on this page is 95363. It uses the 209 area code. The same ZIP also reaches Grayson and Diablo Grande outside city limits. Permits inside Patterson run through the City of Patterson Building Division at 1 Plaza, Patterson, CA 95363. Newman and Tracy have their own desks. Unincorporated 95363 work often goes to Stanislaus County in Modesto. Text the street so the bid matches the desk.
The Plaza is the circular downtown core. Las Palmas Avenue is the palm-lined entry. Highway 33 is 2nd Street on the east edge of downtown. Sperry Avenue is the I-5 gateway and the newer commercial strip. Del Puerto Avenue, Ward Avenue, Baldwin Road, and Keystone Pacific Parkway tie shops and houses to that layout. Occupied shops, Plaza TIs, and house remodels change the layout — not the stud spec.
The usual mismatch is treating a Plaza tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a house up. Occupied houses, open shops, and after-hours offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Patterson Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Patterson, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, Plaza shop, Sperry Avenue suite, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Patterson, CA
This page is steel and metal stud framing in Patterson — ZIP 95363 — from our Fairfield shop. Permits inside city limits run through the City of Patterson Building Division at 1 Plaza. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide → · Newman framing: Newman → · Modesto framing: Modesto →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Patterson address. No claim that we keep a shop on the Plaza. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Newman, Tracy, Grayson, and Diablo Grande are different places. This page is Patterson.
Patterson Metal Stud FAQs
Do you do steel / metal stud framing in Patterson?
Yes. Interior light-gauge metal stud framing in Patterson, CA from our Fairfield shop — partitions, Plaza, Las Palmas Avenue, and Sperry Avenue TIs, house interiors, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Patterson houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Plaza, Las Palmas, and Sperry Avenue TIs, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Las Palmas or Sperry?
Yes. Occupied retail and restaurant TIs on the Plaza, Las Palmas Avenue, and along Sperry Avenue are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Patterson buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open Plaza shop, or an after-hours office. A full TI is still a construction job — plan rooms.
Do you work the Plaza, Las Palmas, Sperry, and Highway 33?
Yes. The Plaza, Las Palmas Avenue, Sperry Avenue, Del Puerto Avenue, Highway 33 / 2nd Street, Ward Avenue, Baldwin Road, and other Patterson addresses in 95363 are on this framing page. Text the street with the photos.
What ZIPs does this Patterson page cover?
95363. Text the street with the photos so the bid matches the Patterson address — not Newman, Tracy, Grayson, or Diablo Grande.
Who issues the permit in Patterson?
City of Patterson Building Division at 1 Plaza, Patterson, CA 95363. Patterson is incorporated and has its own building desk. Grayson, Diablo Grande, and other unincorporated 95363 addresses often go through Stanislaus County instead — send the street so we bid the right desk.
How much does metal stud framing cost in Patterson?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Patterson Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099