Windsor, CA 95492 • Town of Windsor • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Windsor, CA
Light-gauge steel and metal stud framing in Windsor — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Town Green and Old Redwood Highway shops, McClelland Drive interiors, Windsor River Road build-outs, and house remodels in 95492.
Windsor Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not an Old Redwood Highway storefront. Windsor is its own incorporated town in Sonoma County. It is not Santa Rosa and it is not unincorporated Larkfield-Wikiup. This page is steel / metal stud framing at Town of Windsor addresses — 95492 is the Windsor ZIP. This URL slug lists 95403. 95403 is Santa Rosa. Text the street so the bid matches Windsor — Old Redwood Highway, McClelland Drive, Windsor River Road, and the Town Green. It is not Healdsburg, Fulton, Forestville, or Santa Rosa.
Text “Windsor” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Windsor
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 95492 Town of Windsor addresses. This is the skeleton the board hangs on.
Town Green and Old Redwood Highway TIs
Shop, restaurant, tasting-room, office, and medical build-outs on the Town Green and Old Redwood Highway when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
McClelland, Windsor River, and Shiloh interiors
Shop partitions, office interiors, and house walls on McClelland Drive, Windsor River Road, Windsor Road, Conde Lane, Shiloh Road, and Bell Road.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Windsor house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Windsor Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Town Green TI, Old Redwood Highway shop, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, shop TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Windsor house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Windsor Streets, ZIP, and Permits
Windsor is an incorporated town in Sonoma County. Town of Windsor addresses use ZIP 95492. This URL slug lists 95403. 95403 is Santa Rosa — including north Santa Rosa and Larkfield-Wikiup. Area codes are 707 and 369. Permits for Town of Windsor addresses run through the Town of Windsor Building Division at 9291 Old Redwood Highway, Building 400, Windsor, CA 95492. Mail: P.O. Box 100, Windsor, CA 95492-0100. Call (707) 838-5341. Permit technician: (707) 836-2304. Email: buildingpermits@townofwindsor.ca.gov. Fax: (707) 838-7349. Website: townofwindsor.ca.gov. Building counter hours are Monday–Thursday 8:00 a.m.–11:00 a.m. Inspections run Monday–Thursday and can be scheduled on eTRAKiT or by texting 877-813-1904. Inspection line: (707) 522-8346. The town requires a Town of Windsor business license for contractors working inside town limits — Administrative Services, (707) 838-5358, bl@townofwindsor.ca.gov. Permit Sonoma at 2550 Ventura Avenue, Santa Rosa, CA 95403, (707) 565-1900 is a different office — that is for unincorporated Sonoma County land.
Do not treat a 95403 Santa Rosa address as Town of Windsor. Fulton uses 95439. Healdsburg uses 95448. Forestville uses 95436. Text the street so the bid matches Town of Windsor — not Santa Rosa Building, not Permit Sonoma, not Healdsburg.
The Town Green, Old Redwood Highway, McClelland Drive, and Windsor River Road carry a lot of the commercial work. Windsor Road, Conde Lane, Shiloh Road, Bell Road, Highway 101, and Lakewood Village show up on a lot of plans. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a Town Green tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Windsor Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Windsor, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Windsor, CA
This page is steel and metal stud framing in Windsor — Town of Windsor, Sonoma County, ZIP 95492 — from our Fairfield shop. The Building Division is at 9291 Old Redwood Highway, Building 400. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No claim that Town of Windsor is Santa Rosa 95403. No Permit Sonoma hall at 2550 Ventura Avenue, Santa Rosa for town addresses. No storefront on Old Redwood Highway. No structural steel building. No promise that metal studs hold the building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Santa Rosa, Larkfield-Wikiup, Fulton, Healdsburg, and Forestville are different places. This page is Town of Windsor, CA. The slug on this URL lists 95403. Windsor mail uses 95492. Text the street so the permit office matches the address.
Windsor Metal Stud FAQs
Do you do steel / metal stud framing in Windsor?
Yes. Interior light-gauge metal stud framing in Windsor, CA from our Fairfield shop — partitions, Town Green and Old Redwood Highway TIs, McClelland Drive interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Windsor the same as Santa Rosa 95403?
No. The Town of Windsor is its own incorporated town. Windsor addresses use 95492. 95403 is Santa Rosa, including north Santa Rosa and Larkfield-Wikiup. This URL slug lists 95403. Building permits for this page run through Town of Windsor Building Division at 9291 Old Redwood Highway — not Santa Rosa Building and not Permit Sonoma at 2550 Ventura Avenue for unincorporated land.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Windsor houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Town Green TIs, Old Redwood Highway shops, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on the Town Green or Old Redwood Highway?
Yes. Occupied retail, restaurant, tasting-room, office, and medical tenant improvements on the Town Green, Old Redwood Highway, McClelland Drive, and Windsor River Road are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Windsor buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. A full TI is still a construction job — plan rooms.
Is Windsor the same as Healdsburg or Fulton?
No. Healdsburg sits north on 95448. Fulton sits south on 95439. Forestville sits west on 95436. Santa Rosa sits south. Text the street so the bid matches Town of Windsor.
Do you work Old Redwood Highway, McClelland, and Windsor River Road?
Yes. Old Redwood Highway, McClelland Drive, Windsor River Road, Windsor Road, Conde Lane, Shiloh Road, Bell Road, the Town Green, Highway 101, and other Town of Windsor addresses are on this framing page. Text the street with the photos.
What ZIP does this Windsor page cover?
Town of Windsor mail uses 95492. This URL slug lists 95403. 95403 is Santa Rosa. Text the street with the photos so the bid matches the Town of Windsor address — not Santa Rosa 95403.
Who issues the permit in Windsor?
Town of Windsor Building Division, 9291 Old Redwood Highway, Building 400, Windsor, CA 95492. Call (707) 838-5341. Email buildingpermits@townofwindsor.ca.gov. Permit Sonoma at 2550 Ventura Avenue, Santa Rosa, CA 95403 is a different office.
How much does metal stud framing cost in Windsor?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. The Town of Windsor also requires a town business license before a permit is pulled for work inside town limits.
Need Windsor Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099