Granite Bay, CA 95746 • Unincorporated CDP • Folsom Lake • Placer County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Granite Bay, CA
Light-gauge steel and metal stud framing in Granite Bay — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Douglas Boulevard and Auburn-Folsom shops, Eureka Road interiors, and large-lot house remodels in 95746.
Granite Bay Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield — a Sacramento Valley run, not a Douglas Boulevard storefront. Granite Bay is an unincorporated census-designated place in Placer County, west of Folsom Lake — not a city, not Roseville, not Loomis, and not Folsom. Street ZIP 95746 is Granite Bay. That ZIP also covers parts of Roseville and Loomis. 95661 is a Roseville ZIP that can touch the west edge. 95650 is Loomis. 95630 is Folsom. This page is steel / metal stud framing at Granite Bay 95746 addresses — Auburn-Folsom Road, Douglas Boulevard, Eureka Road, and Barton Road. The street decides the bid.
Text “Granite Bay” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Granite Bay
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls at Granite Bay 95746 addresses. This is the skeleton the board hangs on.
Douglas and Auburn-Folsom TIs
Restaurant, shop, office, and commercial build-outs on Douglas Boulevard, Auburn-Folsom Road, and Berg Street when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Eureka Road and Barton interiors
Office, shop, and occupied-building partitions on Eureka Road, Barton Road, Cavitt-Stallman Road, and Sierra College Boulevard. Occupied buildings change the layout — not the stud spec.
Large-lot house remodel partitions
New interior steel walls inside an existing Granite Bay house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Rural streets change the layout — not the stud spec. Metal vs wood →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Granite Bay Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Douglas Boulevard TI, Auburn-Folsom shop, rated walls, or a finish that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, office interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Granite Bay house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete, brick, or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Granite Bay Streets, ZIP, and Permits
Granite Bay is an unincorporated census-designated place in Placer County — east of Roseville and west of Folsom Lake. The community was recognized as Granite Bay on July 28, 1987. It is not an incorporated city. Street ZIP 95746 is Granite Bay. That ZIP also covers parts of Roseville and Loomis. Roseville is an acceptable USPS city line on some 95746 mail. 95661 is Roseville. 95650 is Loomis. 95630 is Folsom. Area codes are 916 and 279. Text the street so the bid matches Placer County Building Services in Auburn — not City of Roseville Building at 311 Vernon Street, not Town of Loomis Building at 3665 Taylor Road, and not City of Folsom Building at 50 Natoma Street.
Permits for Granite Bay addresses run through Placer County Building Services, Auburn Office, 3091 County Center Drive, Auburn, CA 95603. Call (530) 745-3010. Inspection line: (530) 745-3020. Email: building@placer.ca.gov. County site is placer.ca.gov. The Tahoe Building counter at 775 North Lake Boulevard is a different office for Kings Beach and other basin lots. A 95746 mailing ZIP on a Roseville city lot uses City of Roseville Building. A Loomis town lot uses Town of Loomis Building.
Roseville sits west. Loomis sits north. Rocklin sits northwest. Folsom sits south across the Sacramento County line. Folsom Lake sits east. Auburn-Folsom Road is the north-south spine. Douglas Boulevard is the east-west commercial corridor to the lake. Eureka Road, Barton Road, Berg Street, Cavitt-Stallman Road, Olive Ranch Road, and Sierra College Boulevard carry houses and shops. Text the street so the bid matches Granite Bay 95746 — not a Roseville city permit, not a Loomis town permit, and not a Folsom city permit.
Commercial work sits on Douglas Boulevard, Auburn-Folsom Road, Berg Street, Barton Road, and Sierra College Boulevard. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a Douglas Boulevard shop wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Granite Bay Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Granite Bay, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Granite Bay, CA
This page is steel and metal stud framing in Granite Bay — unincorporated Placer County lots in 95746 — from our Fairfield shop. County Building Services is at 3091 County Center Drive in Auburn. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No city hall. Granite Bay is unincorporated. No City of Roseville permit at 311 Vernon Street. No Town of Loomis permit at 3665 Taylor Road. No City of Folsom permit at 50 Natoma Street. No City of Rocklin permit at 3970 Rocklin Road. No claim that every 95746 address is inside the Granite Bay CDP — Roseville and Loomis lots share that ZIP. No 95650 Loomis page. No Tahoe Building counter for a Folsom Lake lot. No storefront on Douglas Boulevard. No structural steel building. No promise that metal studs hold the building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Roseville, Loomis, Folsom, and other addresses that only share Auburn-Folsom Road are different places. This page is Granite Bay, CA, ZIP 95746, unincorporated Placer County — text the street so the permit office matches the address.
Granite Bay Metal Stud FAQs
Do you do steel / metal stud framing in Granite Bay?
Yes. Interior light-gauge metal stud framing in Granite Bay, CA from our Fairfield shop — partitions, Douglas Boulevard and Auburn-Folsom TIs, Eureka Road interiors, large-lot house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Granite Bay a city?
No. Granite Bay is an unincorporated census-designated place in Placer County. The community was recognized as Granite Bay in 1987. Building permits run through Placer County Building Services at 3091 County Center Drive in Auburn — not a city hall.
Is Granite Bay the same as Roseville?
No. Roseville is an incorporated city to the west. Some 95746 mail accepts Roseville as a city line, and 95661 is a Roseville ZIP that can touch the west edge. A Roseville city lot uses City of Roseville Building at 311 Vernon Street. Text the street.
Does 95746 always mean Granite Bay?
No. 95746 is the Granite Bay ZIP, but it also covers parts of Roseville and Loomis. Text the street so the bid matches Placer County Building in Auburn — not Roseville city limits, and not Town of Loomis.
Is this Folsom?
No. Folsom is an incorporated city in Sacramento County, ZIP 95630. Folsom Lake sits east of Granite Bay. City of Folsom Building is at 50 Natoma Street — a different office.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Granite Bay houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Douglas Boulevard and Auburn-Folsom TIs, rated walls, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Douglas Boulevard or Auburn-Folsom?
Yes. Occupied retail, restaurant, office, and commercial tenant improvements on Douglas Boulevard, Auburn-Folsom Road, Berg Street, Barton Road, and Sierra College Boulevard are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Granite Bay buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. Douglas Boulevard traffic to Folsom Lake changes the schedule — not the stud spec.
What ZIP does this Granite Bay page cover?
This page covers Granite Bay street addresses in 95746. That ZIP also serves parts of Roseville and Loomis. 95661 is Roseville. 95650 is Loomis. Text the street with the photos so the bid matches Placer County Building Services in Auburn.
Do you work Auburn-Folsom, Douglas, Eureka, and Barton?
Yes. Auburn-Folsom Road, Douglas Boulevard, Eureka Road, Barton Road, Berg Street, Cavitt-Stallman Road, Olive Ranch Road, Sierra College Boulevard, and other Granite Bay 95746 addresses are on this framing page. Text the street with the photos.
Who issues the permit in Granite Bay?
Placer County Building Services, Auburn Office, 3091 County Center Drive, Auburn, CA 95603. Call (530) 745-3010. City of Roseville Building is a different office. Town of Loomis Building is a different office. City of Folsom Building is a different office. The Tahoe Building counter is a different office for basin lots.
How much does metal stud framing cost in Granite Bay?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work at a Granite Bay address uses Placer County Building Services in Auburn — not Roseville, not Loomis, not Folsom, and not a city hall that does not exist here.
Need Granite Bay Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099
