Elk Grove, CA 95624 • 95757 • 95758 • Incorporated 2000 • Sacramento County • Family-Owned Since 1970 • CSLB #265709

Steel / Metal Stud Framing in Elk Grove, CA

Light-gauge steel and metal stud framing in Elk Grove — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Old Town shops, Elk Grove Boulevard build-outs, Laguna Boulevard interiors, and house remodels on City of Elk Grove lots.

Elk Grove Framing From the Fairfield Shop

Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield — not an Elk Grove Boulevard storefront. Elk Grove is an incorporated city in Sacramento County, south of Sacramento — not Galt, not Vineyard, and not City of Sacramento. It has its own Building Safety & Inspection office at City Hall, 8401 Laguna Palms Way. Street ZIPs include 95624, 95757, and 95758. 95829 is Sacramento. This page is steel / metal stud framing at City of Elk Grove addresses — Old Town, Elk Grove Boulevard, and Laguna Boulevard. The street decides the bid.

Text “Elk Grove” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.

Metal Stud Work We Do in Elk Grove

Interior partition walls

Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls on City of Elk Grove addresses. This is the skeleton the board hangs on.

Old Town and Elk Grove Boulevard TIs

Shop, restaurant, office, and commercial build-outs on Elk Grove Boulevard and Historic Main Street / Old Town when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →

Laguna Boulevard and civic interiors

Retail, medical, and office partitions on Laguna Boulevard, Laguna Palms Way, Bond Road, and Sheldon Road. Occupied buildings change the layout — not the stud spec.

Grant Line, Franklin, and Bruceville edges

Shop and tenant walls on Grant Line Road, Franklin Boulevard, Bruceville Road, Elk Grove-Florin Road, and Stockton Boulevard when the lot is City of Elk Grove. Sacramento and Galt sit next door — city limits still decide the permit office.

House remodel and ADU partitions

New interior steel walls inside an existing Elk Grove house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →

Soffits, bulkheads, and chases

Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.

Fire-rated and heavier-gauge walls

Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.

Frame and hang together

One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →

Which Stud Belongs on an Elk Grove Job

Stud Use it when Skip it when
Light-gauge metal (what we frame) Old Town TI, Elk Grove Boulevard shop, Laguna Boulevard remodel, rated walls, or a finish that needs a flat plane for Level 4 / Level 5 You need beams, columns, or structure that hold the building up — that is a different contractor
25-ga interior studs Short, non-load-bearing partitions with a normal finish Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier
20-ga / heavier track and studs Taller commercial walls, Laguna TIs, or engineer notes A simple closet that never needed the extra gauge
Wood studs Most Elk Grove house walls with no commercial spec The plan already says steel, or the finish will show every bow
Furring / hat channel on masonry Concrete, brick, or masonry walls that need a cavity for boxes before drywall Glue-only board on a finished living space

Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →

Elk Grove Streets, ZIP, and Permits

Elk Grove is an incorporated city in Sacramento County, about 15 miles south of downtown Sacramento. Street ZIPs include 95624 (Old Town / east), 95757 (south Laguna), and 95758 (west Laguna). 95759 is a PO Box. 95829 is Sacramento. Area codes are 916 and 279. Nearby Sacramento uses 958xx ZIPs. Galt uses 95632. Vineyard, Florin, and Wilton are different places. Text the street so the bid matches City of Elk Grove Building Safety — not City of Sacramento Building, not City of Galt Building, and not Sacramento County Building Inspection for unincorporated parcels.

Permits for City of Elk Grove addresses run through City of Elk Grove Development Services, Building Safety & Inspection, City Hall, 8401 Laguna Palms Way, Elk Grove, CA 95758. Building Safety: (916) 478-2235. Inspection line: (916) 478-2225. Email: Bldonline@elkgrovecity.org. City sites are elkgrove.gov and elkgrovecity.org. Cosumnes CSD Fire Prevention is a different review for fire — not the building permit counter.

Sacramento sits north. Galt sits south. Vineyard and Florin sit north as unincorporated county. Wilton and Sloughhouse sit east. SR-99 runs through the center. I-5 hugs the west edge. Elk Grove Boulevard is the east-west spine through Old Town. Laguna Boulevard, Bond Road, Sheldon Road, Grant Line Road, Franklin Boulevard, and Elk Grove-Florin Road fill the grid. The street — not the mailing city on a bill — decides the permit office.

Commercial work sits on Elk Grove Boulevard, Old Town / Historic Main Street, Laguna Boulevard, Laguna Palms Way, Bond Road, Sheldon Road, Grant Line Road, and Stockton Boulevard. Occupied houses and open shops change the layout — not the stud spec.

The usual mismatch is treating an Old Town tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.

How an Elk Grove Metal-Stud Job Runs

1. Photos + place

Text (925) 791-9099 Elk Grove, the street, and the plans or a photo of the wall.

2. Name the wall

Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.

3. We frame it

Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.

Elk Grove, CA

This page is steel and metal stud framing in Elk Grove — City of Elk Grove, Sacramento County — from our Fairfield shop. City Building Safety is at 8401 Laguna Palms Way. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →

Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.

Not on This Page

No claim that 95829 is City of Elk Grove. No City of Sacramento permit for an Elk Grove lot. No City of Galt permit. No Sacramento County Building Inspection permit for a City of Elk Grove address. No storefront on Elk Grove Boulevard. No structural steel building. No promise that metal studs hold the building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Sacramento, Galt, Vineyard, Florin, Wilton, and other addresses that only sit next to Elk Grove are different places. This page is Elk Grove, CA, City of Elk Grove — text the street so the permit office matches the address.

Elk Grove Metal Stud FAQs

Do you do steel / metal stud framing in Elk Grove?

Yes. Interior light-gauge metal stud framing in Elk Grove, CA from our Fairfield shop — partitions, Old Town and Elk Grove Boulevard TIs, Laguna Boulevard interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.

Is Elk Grove a city?

Yes. Elk Grove incorporated on July 1, 2000. Building permits inside city limits run through City of Elk Grove Building Safety & Inspection at 8401 Laguna Palms Way — not Sacramento, not Galt, and not Sacramento County.

Is this structural steel?

No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.

Do Elk Grove houses use metal studs or wood?

Most house walls here are still wood. Metal wins on Old Town TIs, Elk Grove Boulevard shops, rated walls, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.

Can you frame a shop on Elk Grove Boulevard or Laguna?

Yes. Occupied retail, restaurant, office, and commercial tenant improvements on Elk Grove Boulevard, Old Town, Laguna Boulevard, and Bond Road are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.

Do you work occupied Elk Grove buildings?

Yes. Floors are protected and the layout is planned around an occupied house or an open shop. Tight Old Town lots and newer Laguna shops still need a clean layout — not a guessed gauge.

Does one ZIP cover all of Elk Grove?

No. Street ZIPs include 95624, 95757, and 95758. 95829 is Sacramento. Nearby Galt uses 95632. Text the street so the bid matches City of Elk Grove Building Safety.

Do you work Old Town, Elk Grove Boulevard, and Laguna?

Yes. Elk Grove Boulevard, Old Town / Historic Main Street, Laguna Boulevard, Laguna Palms Way, Bond Road, Sheldon Road, Grant Line Road, Franklin Boulevard, Elk Grove-Florin Road, and other City of Elk Grove addresses are on this framing page. Text the street with the photos.

What ZIP does this Elk Grove page cover?

This page covers City of Elk Grove street addresses in 95624, 95757, and 95758. Text the street with the photos so the bid matches City Building Safety — not Sacramento 95829, not Galt 95632, and not Vineyard or Wilton county lots.

Who issues the permit in Elk Grove?

City of Elk Grove Development Services, Building Safety & Inspection, 8401 Laguna Palms Way, Elk Grove, CA 95758. Call (916) 478-2235. City of Sacramento Building is a different office. City of Galt Building is a different office. Sacramento County Building Inspection is a different office for unincorporated parcels.

How much does metal stud framing cost in Elk Grove?

It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.

Are you licensed in California?

Yes. CSLB #265709. Look it up before you book us or anyone else. Work at a City of Elk Grove address uses City of Elk Grove Building Safety — not a Sacramento, Galt, or Sacramento County permit.

Need Elk Grove Walls Framed Straight — Then Hung?

Call the family-owned crew that has been framing interiors and hanging board since 1970.

Call / Text (925) 791-9099