El Granada, CA 94018 • San Mateo County • Unincorporated CDP • Coastside • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in El Granada, CA
Light-gauge steel and metal stud framing in El Granada — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Avenue Alhambra shops, Capistrano Road interiors, and house remodels in 94018.
El Granada Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not an El Granada storefront. El Granada is an unincorporated census-designated place on the San Mateo County coast, north of Half Moon Bay on Highway 1. This page is steel / metal stud framing in El Granada, CA — Avenue Alhambra, Capistrano Road, Avenue Portola, and Cabrillo Highway.
Text “El Granada” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in El Granada
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 94018. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, and shop build-outs on Avenue Alhambra and along Capistrano Road when the drawing says steel studs. El Granada is a Coastside community, not Half Moon Bay city limits — if the plan names metal, that is the bid. Commercial framing →
Avenue Alhambra, Capistrano, and Highway 1 interiors
Shop partitions, restaurant walls, and rated assemblies on Avenue Alhambra, Capistrano Road, Avenue Portola, Coronado Street, and Highway 1 / Cabrillo Highway in El Granada.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing El Granada house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on an El Granada Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Avenue Alhambra TI, Capistrano Road shops, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, office interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most house walls off Columbus Street, Coronado Street, San Carlos Avenue, and the hillside streets with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
El Granada Streets, ZIPs, and Permits
El Granada is an unincorporated census-designated place in San Mateo County on the Coastside. It does not have its own city building desk. The community ZIP on this page is 94018. Some nearby parcels mail as 94019. It uses the 650 area code. Permits for El Granada addresses run through San Mateo County Planning and Building at 455 County Center, 2nd Floor, Redwood City, CA 94063. The City of Half Moon Bay desk at 501 Main Street is a different jurisdiction. Text the street so the bid matches the desk.
Highway 1 / Cabrillo Highway is the coastal corridor. Avenue Alhambra and Capistrano Road hold the shops near the harbor side. Avenue Portola, Coronado Street, Columbus Street, and San Carlos Avenue tie houses to that grid. Occupied shops, Capistrano Road TIs, and house remodels change the layout — not the stud spec. Coastal-zone planning can sit in front of the building permit. Send the street so we bid the right desk.
The usual mismatch is treating an Avenue Alhambra tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a house up. Occupied houses, open shops, and after-hours offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How an El Granada Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 El Granada, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, Avenue Alhambra shop, Capistrano Road suite, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
El Granada, CA
This page is steel and metal stud framing in El Granada — ZIP 94018 — from our Fairfield shop. Permits run through San Mateo County in Redwood City. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide → · Brisbane framing: Brisbane →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake El Granada address. No claim that we keep a shop on Avenue Alhambra. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Half Moon Bay city limits, Moss Beach, Princeton, and Pacifica are different places. This page is El Granada, CA 94018.
El Granada Metal Stud FAQs
Do you do steel / metal stud framing in El Granada?
Yes. Interior light-gauge metal stud framing in El Granada, CA from our Fairfield shop — partitions, Avenue Alhambra and Capistrano Road TIs, house interiors, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do El Granada houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Avenue Alhambra and Capistrano Road TIs, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Avenue Alhambra?
Yes. Occupied retail and restaurant TIs on Avenue Alhambra and along Capistrano Road are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied El Granada buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open Avenue Alhambra shop, or an after-hours office. A full TI is still a construction job — plan rooms.
Do you work Avenue Alhambra, Capistrano, and Highway 1?
Yes. Avenue Alhambra, Capistrano Road, Avenue Portola, Coronado Street, Highway 1 / Cabrillo Highway, and other El Granada addresses in 94018 are on this framing page. Text the street with the photos.
What ZIPs does this El Granada page cover?
94018. Some nearby parcels mail as 94019. Text the street with the photos so the bid matches the El Granada address — not Half Moon Bay city limits, Moss Beach, or Princeton.
Who issues the permit in El Granada?
San Mateo County Planning and Building at 455 County Center, 2nd Floor, Redwood City, CA 94063. El Granada does not have its own city building desk. The City of Half Moon Bay desk at 501 Main Street is a different jurisdiction. Coastal-zone planning can sit in front of the building permit.
How much does metal stud framing cost in El Granada?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need El Granada Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099