Corte Madera, CA 94925 • Incorporated 1916 • Marin County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Corte Madera, CA
Light-gauge steel and metal stud framing in Corte Madera — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: The Village and Town Center shops, Tamalpais and Paradise Drive interiors, and house remodels in 94925.
Corte Madera Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield — a Marin run, not a Village storefront. Corte Madera is an incorporated town in Marin County — not Larkspur, not Mill Valley, and not Greenbrae. It has its own Building Division at Town Hall, 300 Tamalpais Drive. Street ZIP 94925 is Corte Madera. 94976 is a Corte Madera PO Box. 94939 is Larkspur. This page is steel / metal stud framing at Town of Corte Madera 94925 addresses — Tamalpais Drive, Paradise Drive, Madera Boulevard, Redwood Highway, and Tamal Vista Boulevard. The street decides the bid.
Text “Corte Madera” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Corte Madera
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in Corte Madera 94925 addresses. This is the skeleton the board hangs on.
The Village and Town Center TIs
Retail, restaurant, and commercial build-outs at The Village at Corte Madera on Redwood Highway and Town Center on Tamalpais Drive when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Tamalpais and Paradise interiors
Shop, office, and medical-adjacent partitions on Tamalpais Drive, Paradise Drive, San Clemente Drive, and Old Corte Madera Square. Occupied buildings change the layout — not the stud spec.
Madera, Tamal Vista, and 94925 interiors
Office and shop partitions on Madera Boulevard, Tamal Vista Boulevard, Casa Buena Drive, and Corte Madera Avenue when the lot is Town of Corte Madera. Mill Valley’s Corte Madera Avenue is a different city.
House remodel and ADU partitions
New interior steel walls inside an existing Corte Madera house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Corte Madera Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Village or Town Center TI, Paradise Drive shop, rated walls, or a finish that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, mall TIs, restaurant interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Corte Madera house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete, brick, or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Corte Madera Streets, ZIP, and Permits
Corte Madera is an incorporated town in Marin County. This page uses street ZIP 94925. 94976 is a Corte Madera PO Box. Area codes are 415 and 628. Nearby Larkspur uses 94939. Greenbrae uses 94904. Mill Valley uses 94941. Tiburon uses 94920. Text the street so the bid matches Town of Corte Madera Building Division — not City of Larkspur Building at 400 Magnolia Avenue, not City of Mill Valley Building at 26 Corte Madera Avenue, not Town of Tiburon Building at 1505 Tiburon Boulevard, and not Marin County Building at 3501 Civic Center Drive for an unincorporated parcel.
Permits for Town of Corte Madera addresses run through Town of Corte Madera Community Development, Building Division, Town Hall, 300 Tamalpais Drive, Corte Madera, CA 94925. Call (415) 927-5062. Email: buildingpermit@cortemadera.gov. Planning: (415) 927-5064. Town site is townofcortemadera.org. Mill Valley City Hall sits on Corte Madera Avenue in Mill Valley — that street name does not put the job on this page.
Larkspur sits north. Mill Valley sits southwest. Greenbrae sits north across Larkspur. Highway 101 splits The Village from Town Center. Paradise Drive runs east toward Tiburon. Text the street so the bid matches Town of Corte Madera for a town address — not a Larkspur 94939 permit, and not a Mill Valley 94941 permit on Corte Madera Avenue.
Commercial work sits at The Village at Corte Madera, Town Center Corte Madera, Old Corte Madera Square, Paradise Shopping Center, Tamalpais Drive, Paradise Drive, Madera Boulevard, Redwood Highway, and Tamal Vista Boulevard. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a Village tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Corte Madera Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Corte Madera, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Corte Madera, CA
This page is steel and metal stud framing in Corte Madera — ZIP 94925, Town of Corte Madera, Marin County — from our Fairfield shop. Town Building Division is at 300 Tamalpais Drive. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No City of Mill Valley permit at 26 Corte Madera Avenue for a Corte Madera lot. Corte Madera Avenue in Mill Valley is a different city. No City of Larkspur permit at 400 Magnolia Avenue on this page. No Town of Tiburon permit at 1505 Tiburon Boulevard on this page. No Marin County Building permit at 3501 Civic Center Drive for a town lot. No storefront at The Village. No structural steel building. No promise that metal studs hold the building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Larkspur, Mill Valley, Greenbrae, Tiburon, and other addresses that only sit next to Corte Madera are different places. This page is Corte Madera, CA, ZIP 94925, Town of Corte Madera — text the street so the permit office matches the address.
Corte Madera Metal Stud FAQs
Do you do steel / metal stud framing in Corte Madera?
Yes. Interior light-gauge metal stud framing in Corte Madera, CA from our Fairfield shop — partitions, The Village and Town Center TIs, Tamalpais and Paradise interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Corte Madera a city?
Corte Madera is an incorporated town in Marin County. The Town of Corte Madera incorporated in 1916. Building permits inside town limits run through Town of Corte Madera Building Division at 300 Tamalpais Drive — not Larkspur, not Mill Valley, not Tiburon, and not Marin County Building.
Is Corte Madera Avenue the same as Corte Madera?
No. Corte Madera Avenue also runs through Mill Valley. Mill Valley City Hall is at 26 Corte Madera Avenue, Mill Valley, CA 94941. A Mill Valley address on that street uses City of Mill Valley Building — not this Town of Corte Madera page.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Corte Madera houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Village and Town Center TIs, rated walls, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop at The Village or Town Center?
Yes. Occupied retail, restaurant, office, and commercial tenant improvements at The Village at Corte Madera, Town Center, Old Corte Madera Square, and Paradise Shopping Center are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Corte Madera buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. Village storefronts need a clean layout — not a guessed gauge.
Is 94939 Corte Madera?
No. 94925 is the Corte Madera street ZIP. 94976 is a Corte Madera PO Box. 94939 is Larkspur. Nearby Mill Valley uses 94941. Greenbrae uses 94904. Text the street so the bid matches Town of Corte Madera Building Division.
Do you work Tamalpais Drive, Paradise Drive, and Redwood Highway?
Yes. Tamalpais Drive, Paradise Drive, Madera Boulevard, Redwood Highway, Tamal Vista Boulevard, San Clemente Drive, Casa Buena Drive, and other Town of Corte Madera 94925 addresses are on this framing page. Text the street with the photos.
What ZIP does this Corte Madera page cover?
This page covers Corte Madera 94925 street addresses inside the Town of Corte Madera. 94925 is the ZIP on this URL. Text the street with the photos so the bid matches Town Building Division — not Larkspur 94939, not Mill Valley 94941, and not Marin County Building for an unincorporated lot.
Who issues the permit in Corte Madera?
Town of Corte Madera Building Division, Town Hall, 300 Tamalpais Drive, Corte Madera, CA 94925. Call (415) 927-5062. City of Larkspur Building is a different office. City of Mill Valley Building is a different office. Town of Tiburon Building is a different office. Marin County Building is a different office for unincorporated parcels.
How much does metal stud framing cost in Corte Madera?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work at a Town of Corte Madera 94925 address uses Town of Corte Madera Building Division — not a Larkspur, Mill Valley, or Tiburon permit unless the lot is inside that city or town.
Need Corte Madera Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099
