Antelope, CA 95843 • Unincorporated CDP • Sacramento County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Antelope, CA
Light-gauge steel and metal stud framing in Antelope — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Walerga and Elverta shops, Don Julio and Antelope Road interiors, and house remodels in 95843.
Antelope Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield — a Sacramento Valley run, not a Walerga storefront. Antelope is an unincorporated census-designated place in Sacramento County — not Citrus Heights, not Roseville, not North Highlands, and not the City of Sacramento. It does not have its own city building division. Street ZIP 95843 is Antelope. 95660 is North Highlands. 95842 is Foothill Farms / Sacramento. 95621 is Citrus Heights. This page is steel / metal stud framing at Antelope 95843 addresses — Walerga Road, Elverta Road, Antelope Road, Don Julio Boulevard, and Watt Avenue. The street decides the bid.
Text “Antelope” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Antelope
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls at Antelope 95843 addresses. This is the skeleton the board hangs on.
Walerga and Elverta TIs
Restaurant, shop, office, and commercial build-outs on Walerga Road, Elverta Road, and around the Elverta Crossing / Walerga retail nodes when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Don Julio, Antelope Road, and Watt interiors
Office, shop, and occupied-building partitions on Don Julio Boulevard, Antelope Road, Watt Avenue, and Antelope North Road. Occupied buildings change the layout — not the stud spec.
House remodel partitions
New interior steel walls inside an existing Antelope house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Tract streets change the layout — not the stud spec. Metal vs wood →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on an Antelope Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Walerga Road TI, Elverta shop, rated walls, or a finish that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Antelope house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete, brick, or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Antelope Streets, ZIP, and Permits
Antelope is an unincorporated census-designated place in northern Sacramento County — about 15 miles northeast of downtown Sacramento and southwest of Roseville, along the Placer County line. The community name and ZIP 95843 were recognized July 1, 1994 after a 1993 vote. This page uses street ZIP 95843. Area codes are 916 and 279. Nearby North Highlands uses 95660. Foothill Farms uses 95842. Citrus Heights uses 95610 / 95621. Roseville uses 95678 and other Placer County ZIPs. Text the street so the bid matches Sacramento County Building Permits & Inspection — not City of Citrus Heights Building & Safety at 6360 Fountain Square Drive, not City of Roseville Building Division at 311 Vernon Street, and not City of Sacramento Building at 300 Richards Boulevard.
Permits for Antelope 95843 addresses run through Sacramento County Building Permits & Inspection. Call (916) 875-5296. County site is building.saccounty.gov. Downtown Permit Center: 827 7th Street, Room 102, Sacramento, CA 95814. Building Assistance Center: 9800 Goethe Road, Sacramento, CA 95827. Antelope has no city hall and no city building division. A nearby Citrus Heights mailing address is a different city. A Roseville address is Placer County, not Sacramento County.
Citrus Heights sits east. Roseville sits northeast across the county line. North Highlands and Foothill Farms sit south and southwest. Interstate 80 sits south of Antelope Road. Walerga Road and Elverta Road are the main commercial pair. Antelope Road, Don Julio Boulevard, and Watt Avenue carry shops and house streets. Text the street so the bid matches Sacramento County for an Antelope 95843 address — not a Citrus Heights 95621 permit, and not a Roseville 95678 permit.
Commercial work sits on Walerga Road, Elverta Road, Antelope Road, Don Julio Boulevard, Watt Avenue, and Antelope North Road. Occupied tract houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a Walerga shop wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How an Antelope Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Antelope, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Antelope, CA
This page is steel and metal stud framing in Antelope — unincorporated Sacramento County lots in 95843 — from our Fairfield shop. County Building Permits & Inspection is at 827 7th Street, Room 102, with the Building Assistance Center at 9800 Goethe Road. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No City of Citrus Heights permit at 6360 Fountain Square Drive. No City of Roseville permit at 311 Vernon Street. No City of Sacramento permit at 300 Richards Boulevard. No claim that Antelope is an incorporated city — it is an unincorporated CDP with ZIP 95843. No North Highlands 95660 page. No Foothill Farms 95842 page. No Antelope Valley page — Palmdale and Lancaster are Los Angeles County, not Sacramento County. No Lassen County Antelope. No storefront on Walerga. No structural steel building. No promise that metal studs hold the building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Citrus Heights, Roseville, North Highlands, Foothill Farms, and other addresses that only share a nearby freeway are different places. This page is Antelope, CA, ZIP 95843, unincorporated Sacramento County — text the street so the permit office matches the address.
Antelope Metal Stud FAQs
Do you do steel / metal stud framing in Antelope?
Yes. Interior light-gauge metal stud framing in Antelope, CA from our Fairfield shop — partitions, Walerga Road and Elverta TIs, Don Julio and Antelope Road interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Antelope a city?
No. Antelope is an unincorporated census-designated place in Sacramento County. The community name and ZIP 95843 were recognized July 1, 1994. Building permits run through Sacramento County Building Permits & Inspection — not a city building division, not Citrus Heights, and not Roseville.
Is this Antelope Valley?
No. This page is Antelope in Sacramento County, ZIP 95843 — north of Sacramento, next to Citrus Heights and Roseville. Antelope Valley is Palmdale and Lancaster in Los Angeles County. Those are different places and different building departments.
Is North Highlands the same as Antelope?
No. North Highlands is a separate unincorporated CDP that uses ZIP 95660. Antelope uses 95843. Both use Sacramento County Building Permits & Inspection, but they are different communities. Text the street so the bid matches the right page.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Antelope houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Walerga and Elverta TIs, rated walls, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Walerga Road or Elverta Road?
Yes. Occupied retail, restaurant, office, and commercial tenant improvements on Walerga Road, Elverta Road, Antelope Road, Don Julio Boulevard, and Watt Avenue are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Antelope buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. Tract streets and parking lots change the schedule — not the stud spec.
Does 95843 always mean Antelope?
95843 is the Antelope street ZIP. Nearby North Highlands uses 95660. Foothill Farms uses 95842. Citrus Heights uses 95610 / 95621. Roseville uses Placer County ZIPs. Text the street so the bid matches Sacramento County Building — not Citrus Heights city limits, and not Roseville city limits.
Do you work Walerga, Elverta, Don Julio, and Antelope Road?
Yes. Walerga Road, Elverta Road, Antelope Road, Don Julio Boulevard, Watt Avenue, Antelope North Road, and other Antelope 95843 addresses are on this framing page. Text the street with the photos.
What ZIP does this Antelope page cover?
This page covers Antelope street addresses in 95843. Text the street with the photos so the bid matches Sacramento County Building Permits & Inspection — not City of Citrus Heights for a 95621 lot, not City of Roseville for a Placer County lot, and not North Highlands 95660.
Who issues the permit in Antelope?
Sacramento County Building Permits & Inspection. Call (916) 875-5296. Downtown Permit Center: 827 7th Street, Room 102, Sacramento, CA 95814. Building Assistance Center: 9800 Goethe Road, Sacramento, CA 95827. City of Citrus Heights Building & Safety is a different office. City of Roseville Building Division is a different office. City of Sacramento Building is a different office.
How much does metal stud framing cost in Antelope?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work at an Antelope 95843 address uses Sacramento County Building Permits & Inspection — not Citrus Heights, not Roseville, and not City of Sacramento unless the lot is inside those city limits.
Need Antelope Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099
