Vacaville, CA 95687–95688 • Solano County • Incorporated 1892 • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Vacaville, CA
Light-gauge steel and metal stud framing in Vacaville — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Main Street shops, Downtown suites, Merchant Street interiors, and house remodels in 95687 and 95688.
Vacaville Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Vacaville storefront. This page is steel / metal stud framing in the City of Vacaville, CA — Main Street, Merchant Street, Allison Drive, and Alamo Drive.
Text “Vacaville” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Vacaville
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 95687 and 95688. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, medical, and office build-outs Downtown, on Main Street, and along Merchant Street. If the drawing says steel studs, that is the bid. Commercial framing →
Downtown, Main Street, and Merchant Street interiors
Shop partitions, restaurant walls, and rated assemblies on Main Street, Merchant Street, Allison Drive, and Alamo Drive inside city limits.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Ranch remodel and ADU partitions
New interior steel walls inside an existing Vacaville house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Vacaville Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Main Street TI, Downtown shops, Merchant Street suites, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, office interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most house walls off Allison, Alamo, and the neighborhood streets with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Vacaville Streets, ZIPs, and Permits
Vacaville is an incorporated Solano County city — August 9, 1892. City delivery ZIPs on this page are 95687 and 95688. 95696 is Vacaville PO boxes. It uses the 707 and 369 area codes. Permits inside city limits run through the City of Vacaville Building Division at 650 Merchant Street. This page is the City of Vacaville only. Text the street so the bid matches the address.
Main Street carries Downtown. Merchant Street holds City Hall and the civic edge. Allison Drive and Alamo Drive tie the neighborhoods and commercial strips together. Occupied shops, Downtown TIs, and house remodels change the layout — not the stud spec.
The usual mismatch is treating a Main Street tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a house up. Occupied houses, open shops, and after-hours offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Vacaville Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Vacaville, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, Main Street shop, Merchant Street suite, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Vacaville, CA
This page is steel and metal stud framing in the City of Vacaville — ZIPs 95687 and 95688 — from our Fairfield shop. Permits inside city limits run through the City of Vacaville at 650 Merchant Street. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide → · Fairfield framing: Fairfield →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Vacaville address. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Fairfield, Suisun City, and Dixon are different cities. This page is the City of Vacaville.
Vacaville Metal Stud FAQs
Do you do steel / metal stud framing in Vacaville?
Yes. Interior light-gauge metal stud framing in Vacaville, CA from our Fairfield shop — partitions, Main Street and Downtown TIs, Merchant Street interiors, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Vacaville houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Main Street and Downtown TIs, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Main Street or Downtown?
Yes. Occupied retail and restaurant TIs on Main Street, Downtown, and along Merchant Street are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Vacaville buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open Downtown shop, or an after-hours office. A full TI is still a construction job — plan rooms.
Do you work Main Street, Merchant Street, and Allison?
Yes. Main Street, Merchant Street, Allison Drive, Alamo Drive, and other addresses inside city limits are on this framing page. Text the street with the photos.
What ZIPs does this Vacaville page cover?
95687 and 95688. 95696 is Vacaville PO boxes. Text the street with the photos so the bid matches the address inside the city.
Who issues the permit in Vacaville?
The City of Vacaville Building Division at 650 Merchant Street.
How much does metal stud framing cost in Vacaville?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Vacaville Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099
