Suisun City, CA 94585 • Solano County • Incorporated 1868 • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Suisun City, CA
Light-gauge steel and metal stud framing in Suisun City — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Main Street shops, Downtown suites, Civic Center interiors, and house remodels in 94585.
Suisun City Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Suisun City storefront — a short drive, not a fake local address. This page is steel / metal stud framing in Suisun City, CA — Main Street, Civic Center Boulevard, Highway 12, and Pintail Drive.
Text “Suisun City” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Suisun City
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 94585. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, and office build-outs on Main Street and along Civic Center Boulevard when the drawing says steel studs. Suisun City is mostly houses and a compact downtown — if the plan names metal, that is the bid. Commercial framing →
Main Street, Downtown, and Civic Center interiors
Shop partitions, restaurant walls, and rated assemblies on Main Street, Civic Center Boulevard, and Highway 12 inside city limits.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Suisun City house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Suisun City Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Main Street TI, Downtown shops, Civic Center suites, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, office interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most house walls off Pintail, Lotz Way, and the neighborhood streets with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Suisun City Streets, ZIPs, and Permits
Suisun City is an incorporated Solano County city — October 9, 1868. The city delivery ZIP on this page is 94585. Some Suisun addresses also use 94534, which Fairfield uses too. It uses the 707 area code. Permits inside city limits run through the City of Suisun City Building Division at 701 Civic Center Boulevard. This page is the City of Suisun City only. Text the street so the bid matches the address.
Main Street carries Downtown and the waterfront. Civic Center Boulevard and Highway 12 run the civic and commercial edge. Pintail Drive ties the neighborhoods together. Occupied shops, Main Street TIs, and house remodels change the layout — not the stud spec.
The usual mismatch is treating a Main Street tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a house up. Occupied houses, open shops, and after-hours offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Suisun City Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Suisun City, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, Main Street shop, Civic Center suite, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Suisun City, CA
This page is steel and metal stud framing in Suisun City — ZIP 94585 — from our Fairfield shop. Permits inside city limits run through the City of Suisun City at 701 Civic Center Boulevard. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide → · Fairfield framing: Fairfield →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Suisun City address. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Fairfield shares some 94534 mail. Vacaville is a different city. This page is the City of Suisun City.
Suisun City Metal Stud FAQs
Do you do steel / metal stud framing in Suisun City?
Yes. Interior light-gauge metal stud framing in Suisun City, CA from our Fairfield shop — partitions, Main Street and Downtown TIs, Civic Center interiors, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Suisun City houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Main Street TIs, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Main Street or Downtown?
Yes. Occupied retail and restaurant TIs on Main Street and along Civic Center Boulevard are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Suisun City buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open Main Street shop, or an after-hours office. A full TI is still a construction job — plan rooms.
Do you work Main Street, Civic Center, and Highway 12?
Yes. Main Street, Civic Center Boulevard, Highway 12, Pintail Drive, and other addresses inside city limits are on this framing page. Text the street with the photos.
What ZIPs does this Suisun City page cover?
94585. Some Suisun addresses also use 94534, which Fairfield uses too. Text the street with the photos so the bid matches the address inside the city.
Who issues the permit in Suisun City?
The City of Suisun City Building Division at 701 Civic Center Boulevard.
How much does metal stud framing cost in Suisun City?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Suisun City Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099
