Stockton, CA 95202 • Incorporated 1850 • County Seat • San Joaquin County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Stockton, CA
Light-gauge steel and metal stud framing in Stockton — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: downtown Weber Avenue and Main Street shops, Miracle Mile on Pacific Avenue, Hammer Lane and March Lane commercial interiors, and house remodels inside city limits.
Stockton Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield — a San Joaquin County run, not a Pacific Avenue storefront. Stockton is an incorporated city and the county seat — not Lodi, not Manteca, not Lathrop, and not unincorporated San Joaquin County. A Stockton mailing ZIP does not always mean a City of Stockton lot. This page is steel / metal stud framing at City of Stockton addresses — downtown, Miracle Mile, Hammer Lane, and March Lane. The street decides the bid.
Text “Stockton” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Stockton
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls at City of Stockton addresses. This is the skeleton the board hangs on.
Downtown and Miracle Mile TIs
Shop, restaurant, office, and commercial build-outs downtown and on Pacific Avenue when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Hammer Lane and March Lane interiors
Occupied shops, medical suites, retail partitions, and commercial walls on Hammer Lane, March Lane, Benjamin Holt Drive, West Lane, and Eight Mile Road. Occupied buildings change the layout — not the stud spec.
House remodel partitions
New interior steel walls inside an existing Stockton house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Stockton Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Downtown TI, Miracle Mile shop, Hammer Lane suite, rated walls, or a finish that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, shop TIs, medical suites, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Stockton house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Stockton Streets, ZIP, and Permits
Stockton is an incorporated city and the county seat of San Joaquin County — not an unincorporated community. City of Stockton Permit Center issues permits inside city limits. Street ZIPs include 95202, 95203, 95204, 95205, 95206, 95207, 95209, 95210, 95212, 95215, and 95219. A Stockton mailing ZIP can also cover unincorporated lots. Area codes are 209 and 350. Text the street so the bid matches City of Stockton Permit Center at 501 West Weber Avenue, Building 2 — not San Joaquin County Building at 1810 East Hazelton Avenue for a county lot that only uses a Stockton ZIP.
Permits for City of Stockton addresses run through City of Stockton Community Development, Building and Life Safety, Permit Center. Office: 501 West Weber Avenue, Building 2, First Floor, Stockton, CA 95203. Call (209) 937-8561. City site is stocktonca.gov. An unincorporated San Joaquin County lot — even with a Stockton mailing address — uses San Joaquin County Building at 1810 East Hazelton Avenue, Stockton, CA 95205, (209) 468-2098. A City of Lodi lot uses City of Lodi Building. A City of Manteca lot uses City of Manteca Building Safety. A City of Lathrop lot uses City of Lathrop Building. Those are different offices.
Lodi sits north. Manteca and Lathrop sit south. French Camp sits southwest in 95231. Garden Acres, Lincoln Village, Country Club, and Morada sit next to or inside Stockton mailing areas and are not the same as a City of Stockton lot until the street says so. Downtown clusters on Weber Avenue, Main Street, El Dorado Street, and Center Street. Miracle Mile runs Pacific Avenue from Alpine Avenue to Harding Way. Hammer Lane, March Lane, Benjamin Holt Drive, Eight Mile Road, Pershing Avenue, West Lane, Waterloo Road, Airport Way, and Charter Way fill in the grid. Text the street so the bid matches City of Stockton for a city address — not a county permit.
Commercial work sits downtown, on Miracle Mile, and along Hammer Lane and March Lane. Occupied houses and open shops change the layout — not the stud spec. Interstate 5 and Highway 99 traffic change the schedule.
The usual mismatch is treating a Pacific Avenue shop wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Stockton Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Stockton, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Stockton, CA
This page is steel and metal stud framing in Stockton — City of Stockton lots — from our Fairfield shop. City of Stockton Permit Center is at 501 West Weber Avenue, Building 2. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No San Joaquin County permit for a City of Stockton lot. No City of Lodi permit. No City of Manteca permit. No City of Lathrop permit. No claim that every Stockton mailing ZIP is inside city limits — some lots use a Stockton ZIP and still sit in unincorporated San Joaquin County. No storefront on Pacific Avenue. No structural steel building. No promise that metal studs hold the building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Lodi, Manteca, Lathrop, French Camp, and other addresses that only sit next to Stockton are different places. This page is Stockton, CA, City of Stockton — text the street so the permit office matches the address.
Stockton Metal Stud FAQs
Do you do steel / metal stud framing in Stockton?
Yes. Interior light-gauge metal stud framing in Stockton, CA from our Fairfield shop — partitions, downtown and Miracle Mile TIs, Hammer Lane and March Lane interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Stockton a city?
Yes. Stockton incorporated in 1850 and is the county seat of San Joaquin County. City of Stockton Permit Center at 501 West Weber Avenue, Building 2 issues building permits inside city limits. Unincorporated lots that only use a Stockton mailing ZIP use San Joaquin County Building.
Is a Stockton ZIP always inside city limits?
No. Many lots use a Stockton mailing ZIP and still sit in unincorporated San Joaquin County. City of Stockton lots use the Permit Center at 501 West Weber Avenue. County lots use 1810 East Hazelton Avenue. Text the street.
Is Lodi or Manteca the same as Stockton?
No. Lodi and Manteca are separate incorporated cities with their own building departments. A Lodi lot uses City of Lodi Building. A Manteca lot uses City of Manteca Building Safety. Text the street.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Stockton houses use metal studs or wood?
Most house walls here are still wood. Metal wins on downtown TIs, Miracle Mile and Hammer Lane commercial walls, rated walls, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop downtown or on Miracle Mile?
Yes. Occupied retail, restaurant, office, and commercial tenant improvements on Weber Avenue, Main Street, Pacific Avenue, Hammer Lane, and March Lane are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Stockton buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. Interstate 5 and Highway 99 traffic change the schedule — not the stud spec.
What ZIP does this Stockton page cover?
This page covers City of Stockton street addresses, including 95202, 95203, 95204, 95205, 95206, 95207, 95209, 95210, 95212, 95215, and 95219. A Stockton ZIP can also cover an unincorporated lot. French Camp is 95231. Text the street with the photos so the bid matches City of Stockton Permit Center.
Do you work Pacific Avenue, Hammer Lane, March Lane, and downtown?
Yes. Weber Avenue, Main Street, Pacific Avenue, Hammer Lane, March Lane, Benjamin Holt Drive, Eight Mile Road, Pershing Avenue, and other City of Stockton addresses are on this framing page. Text the street with the photos.
Who issues the permit in Stockton?
City of Stockton Permit Center, 501 West Weber Avenue, Building 2, First Floor, Stockton, CA 95203. Call (209) 937-8561. San Joaquin County Building at 1810 East Hazelton Avenue is a different office for unincorporated lots. City of Lodi Building is a different office. City of Manteca Building Safety is a different office.
How much does metal stud framing cost in Stockton?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work at a City of Stockton address uses City of Stockton Permit Center — not San Joaquin County Building unless the lot is outside city limits.
Need Stockton Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099
