San Carlos, CA 94070 • San Mateo County • Incorporated 1925 • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in San Carlos, CA
Light-gauge steel and metal stud framing in San Carlos — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Laurel Street shops, Downtown suites, El Camino interiors, and house remodels in 94070.
San Carlos Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a San Carlos storefront. This page is steel / metal stud framing in San Carlos, CA — Laurel Street, El Camino Real, San Carlos Avenue, and Holly Street.
Text “San Carlos” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in San Carlos
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 94070. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, medical, and office build-outs on Laurel Street and along El Camino Real. If the drawing says steel studs, that is the bid. Commercial framing →
Downtown, Laurel Street, and El Camino interiors
Shop partitions, restaurant walls, and rated assemblies on Laurel Street, El Camino Real, and San Carlos Avenue inside city limits.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Ranch remodel and ADU partitions
New interior steel walls inside an existing San Carlos house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a San Carlos Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Laurel Street TI, Downtown shops, El Camino suites, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, office interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most house walls west of El Camino and off Alameda de las Pulgas with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
San Carlos Streets, ZIPs, and Permits
San Carlos is an incorporated San Mateo County city — July 8, 1925. The city delivery ZIP on this page is 94070. It uses the 650 area code. Permits inside city limits run through the City of San Carlos Building Division at 600 Elm Street. This page is the City of San Carlos only. Text the street so the bid matches the address.
Laurel Street carries Downtown. El Camino Real and San Carlos Avenue run the commercial spine. Holly Street and Alameda de las Pulgas tie the neighborhoods together. Occupied shops, Downtown TIs, and hillside houses change the layout — not the stud spec.
The usual mismatch is treating a Laurel Street tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on hillside framing that only needed wood hang-only. Interior metal studs do not hold a house up. Occupied houses, open shops, and after-hours offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a San Carlos Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 San Carlos, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, Laurel Street shop, El Camino suite, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
San Carlos, CA
This page is steel and metal stud framing in San Carlos — ZIP 94070 — from our Fairfield shop. Permits inside city limits run through the City of San Carlos at 600 Elm Street. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide → · Redwood City framing: Redwood City →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake San Carlos address. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Belmont and Redwood City are different cities. This page is the City of San Carlos.
San Carlos Metal Stud FAQs
Do you do steel / metal stud framing in San Carlos?
Yes. Interior light-gauge metal stud framing in San Carlos, CA from our Fairfield shop — partitions, Laurel Street and Downtown TIs, El Camino interiors, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do San Carlos houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Laurel Street and Downtown TIs, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Laurel Street or Downtown?
Yes. Occupied retail and restaurant TIs on Laurel Street and along El Camino Real are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied San Carlos buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open Downtown shop, or an after-hours office. A full TI is still a construction job — plan rooms.
Do you work Laurel Street, El Camino, and San Carlos Avenue?
Yes. Laurel Street, El Camino Real, San Carlos Avenue, Holly Street, Alameda de las Pulgas, and other addresses inside city limits are on this framing page. Text the street with the photos.
What ZIPs does this San Carlos page cover?
94070. Text the street with the photos so the bid matches the address inside the city.
Who issues the permit in San Carlos?
The City of San Carlos Building Division at 600 Elm Street.
How much does metal stud framing cost in San Carlos?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need San Carlos Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099
