San Bruno, CA 94066 • San Mateo County • Incorporated 1914 • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in San Bruno, CA
Light-gauge steel and metal stud framing in San Bruno — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: San Mateo Avenue shops, Downtown suites, El Camino interiors, and house remodels in 94066.
San Bruno Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a San Bruno storefront. This page is steel / metal stud framing in San Bruno, CA — San Mateo Avenue, El Camino Real, Crystal Springs Avenue, and San Bruno Avenue.
Text “San Bruno” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in San Bruno
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 94066. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, medical, and office build-outs on San Mateo Avenue and along El Camino Real. If the drawing says steel studs, that is the bid. Commercial framing →
Downtown, San Mateo Ave, and El Camino interiors
Shop partitions, restaurant walls, and rated assemblies on San Mateo Avenue, El Camino Real, and Crystal Springs Avenue inside city limits.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Ranch remodel and ADU partitions
New interior steel walls inside an existing San Bruno house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a San Bruno Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | San Mateo Avenue TI, Downtown shops, El Camino suites, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, office interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most house walls off Crystal Springs and the hillside streets with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
San Bruno Streets, ZIPs, and Permits
San Bruno is an incorporated San Mateo County city — December 23, 1914. The city delivery ZIP on this page is 94066. It uses the 650 area code. Permits inside city limits run through the City of San Bruno Building Division at 567 El Camino Real. This page is the City of San Bruno only. Text the street so the bid matches the address.
San Mateo Avenue carries Downtown. El Camino Real and San Bruno Avenue run the commercial spine. Crystal Springs Avenue ties the neighborhoods together. Occupied shops, Downtown TIs, and hillside houses change the layout — not the stud spec.
The usual mismatch is treating a San Mateo Avenue tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on hillside framing that only needed wood hang-only. Interior metal studs do not hold a house up. Occupied houses, open shops, and after-hours offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a San Bruno Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 San Bruno, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, San Mateo Avenue shop, El Camino suite, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
San Bruno, CA
This page is steel and metal stud framing in San Bruno — ZIP 94066 — from our Fairfield shop. Permits inside city limits run through the City of San Bruno at 567 El Camino Real. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide → · Millbrae framing: Millbrae →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake San Bruno address. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Millbrae, South San Francisco, and Pacifica are different cities. This page is the City of San Bruno.
San Bruno Metal Stud FAQs
Do you do steel / metal stud framing in San Bruno?
Yes. Interior light-gauge metal stud framing in San Bruno, CA from our Fairfield shop — partitions, San Mateo Avenue and Downtown TIs, El Camino interiors, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do San Bruno houses use metal studs or wood?
Most house walls here are still wood. Metal wins on San Mateo Avenue and Downtown TIs, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on San Mateo Avenue or Downtown?
Yes. Occupied retail and restaurant TIs on San Mateo Avenue and along El Camino Real are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied San Bruno buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open Downtown shop, or an after-hours office. A full TI is still a construction job — plan rooms.
Do you work San Mateo Avenue, El Camino, and Crystal Springs?
Yes. San Mateo Avenue, El Camino Real, Crystal Springs Avenue, San Bruno Avenue, and other addresses inside city limits are on this framing page. Text the street with the photos.
What ZIPs does this San Bruno page cover?
94066. Text the street with the photos so the bid matches the address inside the city.
Who issues the permit in San Bruno?
The City of San Bruno Building Division at 567 El Camino Real.
How much does metal stud framing cost in San Bruno?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need San Bruno Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099
