Rancho Cordova, CA 95670 • Incorporated 2003 • Sacramento County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Rancho Cordova, CA
Light-gauge steel and metal stud framing in Rancho Cordova — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Folsom Boulevard and Sunrise shops, Zinfandel and Mather Field interiors, and house remodels in 95670.
Rancho Cordova Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield — a valley run, not a Folsom Boulevard storefront. Rancho Cordova is an incorporated city in Sacramento County — not Gold River, not Mather, and not Folsom. Street ZIP 95670 is the main city ZIP. 95742 covers newer south-of-50 lots. 95655 is Mather. This page is steel / metal stud framing at City of Rancho Cordova addresses — Folsom Boulevard, Sunrise Boulevard, Zinfandel Drive, and Mather Field Road. The street decides the bid.
Text “Rancho Cordova” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Rancho Cordova
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls at City of Rancho Cordova addresses. This is the skeleton the board hangs on.
Folsom Boulevard and Sunrise TIs
Restaurant, shop, office, and commercial build-outs on Folsom Boulevard, Sunrise Boulevard, and Coloma Road when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Zinfandel and Mather Field interiors
Retail, medical, office, industrial, and occupied-building partitions on Zinfandel Drive, Mather Field Road, White Rock Road, and International Drive. Occupied buildings change the layout — not the stud spec.
House remodel partitions
New interior steel walls inside an existing Rancho Cordova house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Grid streets change the layout — not the stud spec. Metal vs wood →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Rancho Cordova Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Folsom Boulevard TI, Sunrise shop, rated walls, or a finish that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, medical suites, industrial interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Rancho Cordova house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Rancho Cordova Streets, ZIP, and Permits
Rancho Cordova is an incorporated city in Sacramento County — on Highway 50 between Sacramento and Folsom. The City of Rancho Cordova incorporated on July 1, 2003. Street ZIP 95670 is the main city ZIP. 95742 covers newer lots south of Highway 50. 95741 is a PO Box ZIP. 95655 is Mather. 95670 also covers Gold River and other unincorporated lots outside city limits. Area codes are 916 and 279. Text the street so the bid matches City of Rancho Cordova Building & Safety at 2729 Prospect Park Drive — not Sacramento County Building at 827 7th Street, not City of Folsom Building at 50 Natoma Street, and not City of Sacramento Building at 300 Richards Boulevard.
Permits for City of Rancho Cordova addresses run through City of Rancho Cordova Building & Safety Division, 2729 Prospect Park Drive, Rancho Cordova, CA 95670. Call (916) 851-8760. Email: PermitServices@cityofranchocordova.org. City site is cityofranchocordova.org. A Gold River, Mather, or other unincorporated lot that only uses a Rancho Cordova mailing line uses Sacramento County Building — a different office.
Gold River sits north of the American River. Mather sits south of Highway 50. Folsom sits east. Sacramento sits west. Rosemont and La Riviera sit west on Folsom Boulevard. Highway 50 bisects town. Folsom Boulevard runs parallel to the freeway. Sunrise Boulevard and Zinfandel Drive are the main north-south streets. Mather Field Road, White Rock Road, Coloma Road, International Drive, and Bradshaw Road fill in the grid. Text the street so the bid matches City of Rancho Cordova for a city address — not a Gold River county permit.
Commercial work sits on Folsom Boulevard, Sunrise Boulevard, Zinfandel Drive, Mather Field Road, White Rock Road, and International Drive. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a Folsom Boulevard shop wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Rancho Cordova Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Rancho Cordova, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Rancho Cordova, CA
This page is steel and metal stud framing in Rancho Cordova — City of Rancho Cordova lots in 95670 and 95742 — from our Fairfield shop. City Building & Safety is at 2729 Prospect Park Drive. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No Sacramento County Building permit at 827 7th Street for a City of Rancho Cordova lot. No City of Folsom permit at 50 Natoma Street. No City of Sacramento permit at 300 Richards Boulevard. No claim that every 95670 address is inside city limits — Gold River shares that ZIP. No Mather page. No Rancho Cucamonga page. No storefront on Folsom Boulevard. No structural steel building. No promise that metal studs hold the building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Gold River, Mather, Folsom, and other addresses that only share Highway 50 or Folsom Boulevard are different places. This page is Rancho Cordova, CA, City of Rancho Cordova, Sacramento County — text the street so the permit office matches the address.
Rancho Cordova Metal Stud FAQs
Do you do steel / metal stud framing in Rancho Cordova?
Yes. Interior light-gauge metal stud framing in Rancho Cordova, CA from our Fairfield shop — partitions, Folsom Boulevard and Sunrise TIs, Zinfandel and Mather Field interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Rancho Cordova a city?
Yes. The City of Rancho Cordova incorporated on July 1, 2003. Building permits inside city limits run through City of Rancho Cordova Building & Safety at 2729 Prospect Park Drive — not Sacramento County Building, and not Folsom.
Is Gold River the same as Rancho Cordova?
No. Gold River is an unincorporated community that often uses ZIP 95670. That lot uses Sacramento County Building — not City of Rancho Cordova Building & Safety.
Is Mather the same as Rancho Cordova?
No. Mather is an unincorporated CDP, ZIP 95655. That lot uses Sacramento County Building — not City of Rancho Cordova Building.
Is this Rancho Cucamonga?
No. This page is Rancho Cordova in Sacramento County, California. Rancho Cucamonga is a different city in San Bernardino County.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Rancho Cordova houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Folsom Boulevard and Sunrise TIs, rated walls, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Folsom Boulevard or Sunrise?
Yes. Occupied retail, restaurant, office, medical, industrial, and commercial tenant improvements on Folsom Boulevard, Sunrise Boulevard, Zinfandel Drive, Mather Field Road, and White Rock Road are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Rancho Cordova buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. Highway 50 traffic changes the schedule — not the stud spec.
What ZIP does this Rancho Cordova page cover?
This page covers City of Rancho Cordova street addresses in 95670 and 95742. 95741 is a PO Box ZIP. 95655 is Mather. 95670 also covers Gold River. Text the street with the photos so the bid matches City of Rancho Cordova Building & Safety.
Do you work Folsom Boulevard, Sunrise, Zinfandel, and Mather Field?
Yes. Folsom Boulevard, Sunrise Boulevard, Zinfandel Drive, Mather Field Road, White Rock Road, Coloma Road, International Drive, Prospect Park Drive, and other City of Rancho Cordova addresses are on this framing page. Text the street with the photos.
Who issues the permit in Rancho Cordova?
City of Rancho Cordova Building & Safety Division, 2729 Prospect Park Drive, Rancho Cordova, CA 95670. Call (916) 851-8760. Sacramento County Building at 827 7th Street is a different office for Gold River, Mather, and other unincorporated lots. City of Folsom Building is a different office. City of Sacramento Building is a different office.
How much does metal stud framing cost in Rancho Cordova?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work at a City of Rancho Cordova address uses City of Rancho Cordova Building & Safety — not Sacramento County Building unless the lot is unincorporated.
Need Rancho Cordova Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099
