Pleasant Hill, CA 94523 • Incorporated City • Central Contra Costa • I-680 • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Pleasant Hill, CA
Light-gauge steel and metal stud framing in Pleasant Hill — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Contra Costa Boulevard shops, Monument Boulevard interiors, Gregory Lane build-outs, and house remodels in 94523.
Pleasant Hill Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Contra Costa Boulevard storefront. Pleasant Hill is an incorporated Central Contra Costa city along I-680. This page is steel / metal stud framing at Pleasant Hill 94523 addresses — Contra Costa Boulevard, Monument Boulevard, Gregory Lane, and Oak Park Boulevard. It is not Walnut Creek, Concord, Lafayette, or Martinez.
Text “Pleasant Hill” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Pleasant Hill
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 94523. This is the skeleton the board hangs on.
Contra Costa Boulevard TIs
Shop, restaurant, office, and corridor build-outs on Contra Costa Boulevard when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Monument, Gregory, and Oak Park interiors
Shop partitions, office interiors, and house walls on Monument Boulevard, Gregory Lane, Oak Park Boulevard, Pleasant Hill Road, Taylor Boulevard, and Golf Club Road.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Pleasant Hill house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Pleasant Hill Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Contra Costa Boulevard TI, Monument Boulevard shop, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, shop TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Pleasant Hill house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Pleasant Hill Streets, ZIP, and Permits
Pleasant Hill is an incorporated city in Contra Costa County. The postal ZIP on this page is 94523. Area code is 925. Permits run through the City of Pleasant Hill Building Division at 100 Gregory Lane, Pleasant Hill, CA 94523. Call (925) 671-5200. Email building@pleasanthillca.org. This is not Walnut Creek, Concord, or Contra Costa County Building Inspection in Martinez. Text the street so the bid matches Pleasant Hill — not Walnut Creek, Concord, Lafayette, or Martinez.
Contra Costa Boulevard is the commercial spine parallel to I-680. Monument Boulevard, Gregory Lane, Oak Park Boulevard, Pleasant Hill Road, Taylor Boulevard, and Golf Club Road (Diablo Valley College) show up on a lot of plans. Occupied houses and open Boulevard shops change the layout — not the stud spec.
The usual mismatch is treating a Contra Costa Boulevard tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Pleasant Hill Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Pleasant Hill, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Pleasant Hill, CA
This page is steel and metal stud framing in the City of Pleasant Hill — ZIP 94523 — from our Fairfield shop. City Building is at 100 Gregory Lane. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No claim that Pleasant Hill uses the county desk in Martinez. City Building is at 100 Gregory Lane. No shop on Contra Costa Boulevard. No structural steel building. No promise that metal studs hold the building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Walnut Creek, Concord, Lafayette, and Martinez are different places. This page is Pleasant Hill, CA 94523.
Pleasant Hill Metal Stud FAQs
Do you do steel / metal stud framing in Pleasant Hill?
Yes. Interior light-gauge metal stud framing in Pleasant Hill, CA from our Fairfield shop — partitions, Contra Costa Boulevard TIs, Monument and Gregory interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Pleasant Hill its own city?
Yes. Pleasant Hill is an incorporated Central Contra Costa city. Building permits run through the City of Pleasant Hill Building Division at 100 Gregory Lane, not the county office in Martinez.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Pleasant Hill houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Contra Costa Boulevard TIs, Monument Boulevard shops, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Contra Costa Boulevard?
Yes. Occupied retail, restaurant, and office tenant improvements on Contra Costa Boulevard are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Pleasant Hill buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open Boulevard shop. A full TI is still a construction job — plan rooms.
Is Pleasant Hill the same as Walnut Creek or Concord?
No. Walnut Creek sits south. Concord sits east. Lafayette sits southwest. Martinez sits north. Text the street so the bid matches Pleasant Hill 94523.
Do you work Contra Costa Boulevard, Monument Boulevard, and Gregory Lane?
Yes. Contra Costa Boulevard, Monument Boulevard, Gregory Lane, Oak Park Boulevard, Pleasant Hill Road, Taylor Boulevard, Golf Club Road, and other 94523 addresses are on this framing page. Text the street with the photos.
What ZIP does this Pleasant Hill page cover?
94523. Text the street with the photos so the bid matches the Pleasant Hill address — not Walnut Creek, Concord, Lafayette, or Martinez.
Who issues the permit in Pleasant Hill?
City of Pleasant Hill Building Division, 100 Gregory Lane, Pleasant Hill, CA 94523. Call (925) 671-5200. Email building@pleasanthillca.org. This is not Contra Costa County Building Inspection in Martinez.
How much does metal stud framing cost in Pleasant Hill?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Pleasant Hill Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099
