Piedmont, CA 94611 • East Bay Foothills • Incorporated 1907 • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Piedmont, CA
Light-gauge steel and metal stud framing in Piedmont — interior partitions, remodel walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Highland Avenue civic interiors, house remodels on Oakland Avenue and Grand Avenue, and small commercial work inside city limits.
Piedmont Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Piedmont storefront. This page is steel / metal stud framing in Piedmont, CA — Highland Avenue, Oakland Avenue, Grand Avenue, Moraga Avenue, and Vista Avenue.
Text “Piedmont” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Piedmont
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls inside Piedmont city limits. This is the skeleton the board hangs on.
House remodel framing
New interior steel walls in Piedmont houses and additions when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Civic Center and Highland interiors
Partitions, soffits, and rated assemblies in Civic Center work, on Highland Avenue, and in the small commercial pockets on Grand Avenue inside city limits.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
ADU and addition partitions
Interior metal studs for new rooms and ADU layouts when the drawing names steel, or when hillside glass will show every bow in the lumber.
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Piedmont Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Civic interiors, Highland Avenue commercial work, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 under hillside glass | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller walls, civic interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most house walls off Highland Avenue, Oakland Avenue, Grand Avenue, and Moraga Avenue with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Piedmont Streets, ZIPs, and Permits
Piedmont is an incorporated Alameda County city — January 31, 1907. Street addresses inside city limits commonly use 94602, 94610, 94611, and 94618. 94620 is the Piedmont post-office box ZIP. It uses the 510 and 341 area codes. Permits inside city limits run through the City of Piedmont Planning & Building Department at 120 Vista Avenue, 94611. This page is the City of Piedmont only. Text the street so the bid matches the address.
Highland Avenue and Vista Avenue carry Civic Center. Oakland Avenue, Grand Avenue, and Moraga Avenue run the neighborhoods. Occupied houses, hillside glass, and small Highland Avenue interiors change the layout — not the stud spec.
The usual mismatch is treating a Civic Center tenant wall like a bedroom 2×4 — or hanging a Level 5 finish on framing that only needed wood hang-only. Interior metal studs do not hold a house up. Occupied houses and after-hours civic rooms need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Piedmont Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Piedmont, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, remodel layout, soffit, rated assembly, Civic Center interior, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Piedmont, CA
This page is steel and metal stud framing in Piedmont — city-limit addresses on 94602, 94610, 94611, and 94618 — from our Fairfield shop. Permits inside city limits run through the City of Piedmont at 120 Vista Avenue. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Piedmont address. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. This page is the City of Piedmont.
Piedmont Metal Stud FAQs
Do you do steel / metal stud framing in Piedmont?
Yes. Interior light-gauge metal stud framing in Piedmont, CA from our Fairfield shop — partitions, house remodel walls, Civic Center interiors, Highland Avenue work, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Piedmont houses use metal studs or wood?
Most house walls here are still wood. Metal wins on civic interiors, Highland Avenue commercial work, rated partitions, and remodels that need a straighter plane for a smooth finish under hillside glass. If the drawing names the stud, that wins.
Can you frame a Civic Center or Highland Avenue interior?
Yes. Civic interiors and the small commercial pockets on Highland Avenue and Grand Avenue inside city limits are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Piedmont houses?
Yes. Floors are protected and the layout is planned around an occupied house or an after-hours civic room. A full remodel is still a construction job — plan rooms.
Do you work Highland, Oakland Avenue, and Grand Avenue?
Yes. Highland Avenue, Oakland Avenue, Grand Avenue, Moraga Avenue, Vista Avenue, Civic Center, and other addresses inside city limits are on this framing page. Text the street with the photos.
What ZIPs does this Piedmont page cover?
City-limit street addresses commonly use 94602, 94610, 94611, and 94618. 94620 is the Piedmont PO Box ZIP. Text the street with the photos so the bid matches the address inside the city.
Who issues the permit in Piedmont?
The City of Piedmont Planning & Building Department at 120 Vista Avenue, CA 94611.
How much does metal stud framing cost in Piedmont?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Piedmont Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099
