Lafayette, CA 94549 • Incorporated City • Lamorinda • Contra Costa County • Family-Owned Since 1970 • CSLB #265709

Steel / Metal Stud Framing in Lafayette, CA

Light-gauge steel and metal stud framing in Lafayette — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Mount Diablo Boulevard shops, Moraga Road interiors, First Street build-outs, and house remodels in 94549.

Lafayette Framing From the Fairfield Shop

Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Mount Diablo Boulevard storefront. Lafayette is an incorporated Contra Costa city in Lamorinda — Lafayette, Moraga, and Orinda. This page is steel / metal stud framing at Lafayette 94549 addresses — Mount Diablo Boulevard, Moraga Road, First Street, Dewing Avenue, and Happy Valley Road. It is not Orinda, Moraga, Walnut Creek, or Pleasant Hill.

Text “Lafayette” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.

Metal Stud Work We Do in Lafayette

Interior partition walls

Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 94549. This is the skeleton the board hangs on.

Mount Diablo Boulevard TIs

Shop, restaurant, office, and downtown build-outs on Mount Diablo Boulevard when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →

Moraga Road, First Street, and Dewing interiors

Shop partitions, office interiors, and house walls on Moraga Road, First Street, Dewing Avenue, Golden Gate Way, Pleasant Hill Road, and Happy Valley Road.

Soffits, bulkheads, and chases

Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.

Fire-rated and heavier-gauge walls

Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.

House remodel and ADU partitions

New interior steel walls inside an existing Lafayette house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →

Frame and hang together

One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →

Which Stud Belongs on a Lafayette Job

Stud Use it when Skip it when
Light-gauge metal (what we frame) Mount Diablo Boulevard TI, downtown office, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 You need beams, columns, or hillside structure that hold the house up — that is a different contractor
25-ga interior studs Short, non-load-bearing partitions with a normal finish Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier
20-ga / heavier track and studs Taller commercial walls, shop TIs, or engineer notes A simple closet that never needed the extra gauge
Wood studs Most Lafayette house walls with no commercial spec The plan already says steel, or the finish will show every bow
Furring / hat channel on masonry Concrete or masonry walls that need a cavity for boxes before drywall Glue-only board on a finished living space

Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →

Lafayette Streets, ZIP, and Permits

Lafayette is an incorporated city in Contra Costa County. The postal ZIP on this page is 94549. Area code is 925. Start with City of Lafayette Planning & Building at 3675 Mount Diablo Boulevard, Suite 210, Lafayette, CA 94549. Call (925) 284-1976. Building permits and inspections for code-regulated work are issued by Contra Costa County Building Inspection at 30 Muir Road, Martinez, CA 94553. Call (925) 655-2700. Inspections: (925) 646-4108. This is not Orinda, Moraga, or Walnut Creek city halls. Text the street so the bid matches Lafayette — not Orinda, Moraga, Walnut Creek, or Pleasant Hill.

Mount Diablo Boulevard is the downtown commercial spine. Moraga Road runs south toward the Town of Moraga. First Street and Dewing Avenue sit in the downtown core. SR-24 and Lafayette BART sit on the north edge. Occupied houses and open Mount Diablo shops change the layout — not the stud spec.

The usual mismatch is treating a downtown tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a hillside house up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.

How a Lafayette Metal-Stud Job Runs

1. Photos + place

Text (925) 791-9099 Lafayette, the street, and the plans or a photo of the wall.

2. Name the wall

Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.

3. We frame it

Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.

Lafayette, CA

This page is steel and metal stud framing in the City of Lafayette — ZIP 94549 — from our Fairfield shop. City Planning is on Mount Diablo Boulevard. Building permits and inspections run through Contra Costa County in Martinez. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →

Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.

Not on This Page

No claim that Lafayette issues its own building permits without the county desk. No shop on Mount Diablo Boulevard. No structural steel building. No promise that metal studs hold a hillside house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Orinda, Moraga, Walnut Creek, and Pleasant Hill are different places. This page is Lafayette, CA 94549.

Lafayette Metal Stud FAQs

Do you do steel / metal stud framing in Lafayette?

Yes. Interior light-gauge metal stud framing in Lafayette, CA from our Fairfield shop — partitions, Mount Diablo Boulevard TIs, Moraga Road interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.

Is Lafayette its own city?

Yes. Lafayette is an incorporated Contra Costa city in Lamorinda. Start with City Planning & Building at 3675 Mount Diablo Boulevard, Suite 210. Building permits and inspections for code work are issued by the Contra Costa County Building Official in Martinez.

Is this structural steel?

No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the house up are a different contractor.

Do Lafayette houses use metal studs or wood?

Most house walls here are still wood. Metal wins on Mount Diablo Boulevard TIs, downtown offices, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.

Can you frame a shop on Mount Diablo Boulevard?

Yes. Occupied retail, restaurant, and office tenant improvements on Mount Diablo Boulevard and Moraga Road are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.

Do you work occupied Lafayette buildings?

Yes. Floors are protected and the layout is planned around an occupied house or an open downtown shop. A full TI is still a construction job — plan rooms.

Is Lafayette the same as Orinda or Moraga?

No. Orinda sits west. Moraga sits south. Walnut Creek sits east. Pleasant Hill sits northeast. Text the street so the bid matches Lafayette 94549.

Do you work Mount Diablo Boulevard, Moraga Road, and First Street?

Yes. Mount Diablo Boulevard, Moraga Road, First Street, Dewing Avenue, Golden Gate Way, Pleasant Hill Road, Happy Valley Road, and other 94549 addresses are on this framing page. Text the street with the photos.

What ZIP does this Lafayette page cover?

94549. Text the street with the photos so the bid matches the Lafayette address — not Orinda 94563 or Walnut Creek.

Who issues the permit in Lafayette?

Start at City of Lafayette Planning & Building, 3675 Mount Diablo Boulevard, Suite 210, Lafayette, CA 94549. Call (925) 284-1976. Building permits and inspections for code-regulated work are issued by Contra Costa County Building Inspection, 30 Muir Road, Martinez, CA 94553. Call (925) 655-2700. Inspections: (925) 646-4108.

How much does metal stud framing cost in Lafayette?

It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.

Are you licensed in California?

Yes. CSLB #265709. Look it up before you book us or anyone else.

Need Lafayette Walls Framed Straight — Then Hung?

Call the family-owned crew that has been framing interiors and hanging board since 1970.

Call / Text (925) 791-9099
Metal Stud Framing Near Me Lafayette, CA
Compelling Reasons for Metal Framing in Lafayette
Optimal Applications for Metal Framing in Lafayette