Dublin, CA 94568 • Tri-Valley • Incorporated 1982 • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Dublin, CA
Light-gauge steel and metal stud framing in Dublin — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Dublin Boulevard shops, Hacienda Crossings suites, Downtown interiors, and house remodels in 94568.
Dublin Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Dublin storefront. This page is steel / metal stud framing in Dublin, CA — Dublin Boulevard, Amador Valley Boulevard, San Ramon Road, Village Parkway, Dougherty Road, and Tassajara Road.
Text “Dublin” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Dublin
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 94568. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, medical, and office build-outs on Dublin Boulevard, Hacienda Crossings, Downtown Dublin, and Amador Plaza Road. If the drawing says steel studs, that is the bid. Commercial framing →
Downtown, Boulevard, and Hacienda interiors
Shop partitions, restaurant walls, and rated assemblies in Downtown Dublin, along Dublin Boulevard, at Hacienda Crossings, Tralee Village, Grafton Station, and the Shops at Waterford inside city limits.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Ranch remodel and ADU partitions
New interior steel walls inside an existing Dublin house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Dublin Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Dublin Boulevard TI, Hacienda Crossings shops, Downtown suites, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, office interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most house walls off San Ramon Village, Dublin Ranch, Wallis Ranch, Tassajara Hills, Sorrento, and older ranch streets with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or block walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Dublin Streets, ZIP, and Permits
Dublin is an incorporated Alameda County city — February 1, 1982. The city ZIP is 94568. It uses the 925 area code. Permits inside city limits run through the City of Dublin Building & Safety Division at 100 Civic Plaza, 94568. This page is the City of Dublin only. Text the street so the bid matches the address.
Dublin Boulevard carries Downtown and the big centers. Amador Valley Boulevard, San Ramon Road, Village Parkway, Dougherty Road, Hacienda Drive, and Tassajara Road run the neighborhoods and retail. Occupied shops, Hacienda Crossings TIs, and Dublin Ranch and San Ramon Village houses change the layout — not the stud spec.
The usual mismatch is treating a Dublin Boulevard tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on ranch framing that only needed wood hang-only. Interior metal studs do not hold a house up. Occupied houses, open shops, and after-hours offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Dublin Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Dublin, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, Hacienda Crossings shop, Dublin Ranch remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Dublin, CA
This page is steel and metal stud framing in Dublin — ZIP 94568 — from our Fairfield shop. Permits inside city limits run through the City of Dublin at 100 Civic Plaza. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Dublin address. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. This page is the City of Dublin.
Dublin Metal Stud FAQs
Do you do steel / metal stud framing in Dublin?
Yes. Interior light-gauge metal stud framing in Dublin, CA from our Fairfield shop — partitions, Dublin Boulevard TIs, Hacienda Crossings interiors, Downtown suites, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Dublin houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Dublin Boulevard TIs, Hacienda Crossings interiors, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop Downtown or at Hacienda Crossings?
Yes. Occupied retail and restaurant TIs on Dublin Boulevard, Hacienda Crossings, Tralee Village, Grafton Station, and the Shops at Waterford are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Dublin buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open shop, or an after-hours office. A full TI is still a construction job — plan rooms.
Do you work Downtown, Dublin Ranch, and San Ramon Village?
Yes. Downtown Dublin, San Ramon Village, Dublin Ranch, Wallis Ranch, Tassajara Hills, Jordan Ranch, Schaefer Ranch, Sorrento, and other addresses inside city limits are on this framing page. Text the street with the photos.
What ZIP does this Dublin page cover?
94568. Text the street with the photos so the bid matches the address inside the city.
Who issues the permit in Dublin?
The City of Dublin Building & Safety Division at 100 Civic Plaza, CA 94568.
How much does metal stud framing cost in Dublin?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Dublin Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099
