Danville, CA 94526 • San Ramon Valley • Incorporated 1982 • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Danville, CA
Light-gauge steel and metal stud framing in Danville — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Hartz Avenue shops, Railroad Avenue suites, Sycamore Valley and Diablo Road interiors, and house remodels in 94526 and 94506.
Danville Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Danville storefront. This page is steel / metal stud framing in Danville, CA — Hartz Avenue, Railroad Avenue, Front Street, Danville Boulevard, Sycamore Valley Road, Diablo Road, and Camino Tassajara.
Text “Danville” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Danville
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 94526 and 94506. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, medical, and office build-outs on Hartz Avenue, Railroad Avenue, and Front Street. If the drawing says steel studs, that is the bid. Commercial framing →
Downtown Hartz and Railroad interiors
Shop partitions, restaurant walls, and rated assemblies in Downtown Danville along Hartz Avenue, Railroad Avenue, Front Street, and Prospect Avenue inside town limits.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Remodel and ADU partitions
New interior steel walls inside an existing Danville house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Danville Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Hartz Avenue TI, Railroad Avenue shops, downtown offices, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, office interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most house walls off Sycamore Valley Road, Diablo Road, Greenbrook, Westside, Montair, Cameo Acres, and older downtown streets with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or block walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Danville Streets, ZIPs, and Permits
Danville is an incorporated town in the San Ramon Valley — July 1, 1982. The town ZIPs are 94526 and 94506. It uses the 925 area code. Permits inside town limits run through the Town of Danville Building Division at 510 La Gonda Way, 94526. This page is the Town of Danville only. Text the street so the bid matches the address.
Hartz Avenue, Railroad Avenue, Front Street, and Prospect Avenue carry Downtown. Danville Boulevard, San Ramon Valley Boulevard, Sycamore Valley Road, Diablo Road, and Camino Tassajara carry the neighborhoods and through traffic. The Iron Horse Trail runs through town. Occupied shops, downtown remodels, and Sycamore, Greenbrook, and Tassajara houses change the layout — not the stud spec.
The usual mismatch is treating a Hartz Avenue tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a house up. Occupied houses, open downtown shops, and after-hours offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Danville Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Danville, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, Hartz Avenue shop, Sycamore remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Danville, CA
This page is steel and metal stud framing in Danville — ZIPs 94526 and 94506 — from our Fairfield shop. Permits inside town limits run through the Town of Danville at 510 La Gonda Way. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Danville address. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. This page is the Town of Danville.
Danville Metal Stud FAQs
Do you do steel / metal stud framing in Danville?
Yes. Interior light-gauge metal stud framing in Danville, CA from our Fairfield shop — partitions, Hartz Avenue TIs, Railroad Avenue interiors, Sycamore Valley and Diablo Road remodels, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Danville houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Hartz Avenue TIs, downtown shop interiors, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Hartz Avenue?
Yes. Occupied retail and restaurant TIs on Hartz Avenue, Railroad Avenue, Front Street, and Prospect Avenue are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Danville buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open downtown shop, or an after-hours office. A full TI is still a construction job — plan rooms.
Do you work Downtown, Sycamore, and Tassajara?
Yes. Downtown Danville, Westside, Greenbrook, Sycamore Valley, Montair, Cameo Acres, Tassajara, and other addresses inside town limits are on this framing page. Text the street with the photos.
What ZIPs does this Danville page cover?
94526 and 94506. Text the street with the photos so the bid matches the address inside the town.
Who issues the permit in Danville?
The Town of Danville Building Division at 510 La Gonda Way, CA 94526.
How much does metal stud framing cost in Danville?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Danville Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099
