Cupertino, CA 95014 • Santa Clara Valley • Incorporated 1955 • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Cupertino, CA
Light-gauge steel and metal stud framing in Cupertino — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: De Anza and Stevens Creek shops, Main Street and Vallco suites, Homestead interiors, and house remodels in 95014.
Cupertino Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Cupertino storefront. This page is steel / metal stud framing in Cupertino, CA — De Anza Boulevard, Stevens Creek Boulevard, Homestead Road, Wolfe Road, and Vallco Parkway.
Text “Cupertino” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Cupertino
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 95014. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, medical, and office build-outs on De Anza Boulevard, Stevens Creek Boulevard, and at Main Street Cupertino. If the drawing says steel studs, that is the bid. Commercial framing →
Main Street, Vallco, and Homestead interiors
Shop partitions, restaurant walls, and rated assemblies at Main Street Cupertino, in the Vallco district, and along Homestead Road inside city limits.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Ranch remodel and ADU partitions
New interior steel walls inside an existing Cupertino house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Cupertino Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | De Anza TI, Stevens Creek shops, Main Street and Vallco suites, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, office interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most house walls off Monta Vista, Rancho Rinconada, Homestead, and older ranch streets with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Cupertino Streets, ZIP, and Permits
Cupertino is an incorporated Santa Clara County city — October 10, 1955. The city ZIP is 95014 (95015 is a Cupertino PO box). It uses the 408 and 669 area codes. Permits inside city limits run through the City of Cupertino Building Division at 10300 Torre Avenue, 95014. This page is the City of Cupertino only. Text the street so the bid matches the address.
De Anza Boulevard and Stevens Creek Boulevard carry the main commercial corridors. Homestead Road, Wolfe Road, and Vallco Parkway run the neighborhoods, Main Street, and retail. Occupied shops, office TIs, and Monta Vista houses change the layout — not the stud spec.
The usual mismatch is treating a De Anza tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on ranch framing that only needed wood hang-only. Interior metal studs do not hold a house up. Occupied houses, open shops, and after-hours offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Cupertino Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Cupertino, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, Main Street shop, Vallco suite, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Cupertino, CA
This page is steel and metal stud framing in Cupertino — ZIP 95014 — from our Fairfield shop. Permits inside city limits run through the City of Cupertino at 10300 Torre Avenue. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Cupertino address. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. This page is the City of Cupertino.
Cupertino Metal Stud FAQs
Do you do steel / metal stud framing in Cupertino?
Yes. Interior light-gauge metal stud framing in Cupertino, CA from our Fairfield shop — partitions, De Anza and Stevens Creek TIs, Main Street and Vallco interiors, Homestead suites, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Cupertino houses use metal studs or wood?
Most house walls here are still wood. Metal wins on De Anza and Stevens Creek TIs, Main Street and Vallco interiors, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on De Anza or at Main Street?
Yes. Occupied retail and restaurant TIs on De Anza Boulevard, Stevens Creek Boulevard, at Main Street Cupertino, and in the Vallco district are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Cupertino buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open De Anza shop, or an after-hours office. A full TI is still a construction job — plan rooms.
Do you work Homestead, Monta Vista, and Vallco?
Yes. Homestead, Monta Vista, Rancho Rinconada, Vallco, Main Street Cupertino, and other addresses inside city limits are on this framing page. Text the street with the photos.
What ZIP does this Cupertino page cover?
95014. 95015 is a Cupertino PO box. Text the street with the photos so the bid matches the address inside the city.
Who issues the permit in Cupertino?
The City of Cupertino Building Division at 10300 Torre Avenue, CA 95014.
How much does metal stud framing cost in Cupertino?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Cupertino Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099
