Atherton, CA 94027 • San Mateo County • Incorporated 1923 • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Atherton, CA
Light-gauge steel and metal stud framing in Atherton — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: estate remodel interiors, ADU partitions, El Camino suites, and house work in 94027.
Atherton Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not an Atherton storefront. This page is steel / metal stud framing in Atherton, CA — El Camino Real, Atherton Avenue, Middlefield Road, Alameda de las Pulgas, and Fair Oaks Lane.
Text “Atherton” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Atherton
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 94027. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, medical, and office build-outs on El Camino Real when the drawing says steel studs. Atherton is mostly houses — if the plan names metal, that is the bid. Commercial framing →
Estate remodel interiors
New interior walls, soffits, and rated assemblies inside existing Atherton houses on Atherton Avenue, Selby Lane, Oak Grove Avenue, and Fair Oaks Lane.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Ranch remodel and ADU partitions
New interior steel walls inside an existing Atherton house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on an Atherton Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | El Camino TI, estate remodel walls that need a flat plane for Level 4 / Level 5, rated partitions, or a spec that names steel studs | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller interior walls, commercial spec on El Camino, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most house walls on Atherton Avenue, Selby Lane, Oak Grove Avenue, and Fair Oaks Lane with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Atherton Streets, ZIPs, and Permits
Atherton is an incorporated San Mateo County town — September 12, 1923. The city delivery ZIP on this page is 94027. It uses the 650 area code. Permits inside town limits run through the Town of Atherton Building Department at 80 Fair Oaks Lane. This page is the Town of Atherton only. Text the street so the bid matches the address.
El Camino Real carries the commercial edge. Atherton Avenue, Middlefield Road, Alameda de las Pulgas, Fair Oaks Lane, Selby Lane, Oak Grove Avenue, Valparaiso Avenue, and Watkins Avenue run the neighborhoods. Occupied estate houses and El Camino suites change the layout — not the stud spec.
The usual mismatch is hanging a Level 5 finish on estate framing that only needed wood hang-only — or treating an El Camino tenant wall like a bedroom 2×4. Interior metal studs do not hold a house up. Occupied houses and after-hours offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How an Atherton Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Atherton, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, estate remodel, soffit, rated assembly, El Camino suite, ADU wall, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the house. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Atherton, CA
This page is steel and metal stud framing in Atherton — ZIP 94027 — from our Fairfield shop. Permits inside town limits run through the Town of Atherton at 80 Fair Oaks Lane. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Atherton address. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Menlo Park, Redwood City, Woodside, and Palo Alto are different cities. This page is the Town of Atherton.
Atherton Metal Stud FAQs
Do you do steel / metal stud framing in Atherton?
Yes. Interior light-gauge metal stud framing in Atherton, CA from our Fairfield shop — partitions, estate remodel interiors, El Camino suites, ADU walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Atherton houses use metal studs or wood?
Most house walls here are still wood. Metal wins on El Camino TIs, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame interiors on El Camino or in an estate house?
Yes. Occupied estate remodels and El Camino suites inside town limits are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Atherton houses?
Yes. Floors are protected and the layout is planned around an occupied house or an after-hours office. A full remodel is still a construction job — plan rooms.
Do you work Atherton Avenue, Selby Lane, and Fair Oaks?
Yes. Atherton Avenue, Selby Lane, Fair Oaks Lane, Oak Grove Avenue, Middlefield Road, Alameda de las Pulgas, El Camino Real, and other addresses inside town limits are on this framing page. Text the street with the photos.
What ZIPs does this Atherton page cover?
94027. Text the street with the photos so the bid matches the address inside the town.
Who issues the permit in Atherton?
The Town of Atherton Building Department at 80 Fair Oaks Lane.
How much does metal stud framing cost in Atherton?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Atherton Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099
