Antioch, CA 94509 • East Contra Costa • Incorporated 1872 • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Antioch, CA
Light-gauge steel and metal stud framing in Antioch — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Lone Tree Way shops, Rivertown suites, Hillcrest and Deer Valley interiors, and house remodels in 94509 and 94531.
Antioch Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not an Antioch storefront. This page is steel / metal stud framing in Antioch, CA — Lone Tree Way, Hillcrest Avenue, Somersville Road, Deer Valley Road, A Street, James Donlon Boulevard, and Second Street in Rivertown.
Text “Antioch” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Antioch
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 94509 and 94531. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, medical, and office build-outs on Lone Tree Way, Somersville Road, Hillcrest Avenue, and Deer Valley Road. If the drawing says steel studs, that is the bid. Commercial framing →
Rivertown, Lone Tree, and Hillcrest interiors
Shop partitions, restaurant walls, and rated assemblies in historic Rivertown, Lone Tree Way retail, Somersville corridors, and Deer Valley medical suites inside Antioch city limits.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Remodel and ADU partitions
New interior steel walls inside an existing Antioch house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on an Antioch Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Lone Tree Way TI, Rivertown shops, Somersville retail, Deer Valley medical suites, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, office interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most house walls off A Street, James Donlon, Contra Loma, Gentrytown, Lone Tree, Sand Creek, and older Rivertown streets with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or block walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Antioch Streets, ZIPs, and Permits
Antioch is an incorporated East Contra Costa city — February 6, 1872 — on the San Joaquin River and Highway 4. The city ZIPs are 94509 and 94531. It uses the 925 area code. Permits inside city limits run through the City of Antioch Building Services Division at 200 H Street, 2nd Floor City Hall, 94509. This page is the City of Antioch only. Text the street so the bid matches the address.
Lone Tree Way, Hillcrest Avenue, Somersville Road, Deer Valley Road, A Street, James Donlon Boulevard, Delta Fair Boulevard, and Second Street in Rivertown carry the shops and through traffic. Historic Rivertown sits near the river. Occupied shops, mid-century remodels, and newer Lone Tree and Sand Creek houses change the layout — not the stud spec.
The usual mismatch is treating a Lone Tree tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a house up. Occupied houses, open Rivertown shops, and after-hours medical offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How an Antioch Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Antioch, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, Lone Tree shop, Rivertown remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Antioch, CA
This page is steel and metal stud framing in Antioch — ZIPs 94509 and 94531 — from our Fairfield shop. Permits inside city limits run through the City of Antioch at 200 H Street. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Antioch address. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. This page is the City of Antioch.
Antioch Metal Stud FAQs
Do you do steel / metal stud framing in Antioch?
Yes. Interior light-gauge metal stud framing in Antioch, CA from our Fairfield shop — partitions, Lone Tree Way TIs, Rivertown interiors, Somersville and Deer Valley suites, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Antioch houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Lone Tree Way TIs, Rivertown shop interiors, rated partitions, medical suites, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Lone Tree Way or in Rivertown?
Yes. Occupied retail and restaurant TIs on Lone Tree Way, Somersville Road, Hillcrest Avenue, and Second Street in Rivertown are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Antioch buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open Rivertown shop, or an after-hours medical office. A full TI is still a construction job — plan rooms.
Do you work Rivertown, Lone Tree, and Deer Valley?
Yes. Historic Rivertown, Lone Tree, Deer Valley, Sand Creek, Gentrytown, Contra Loma, and other addresses inside Antioch city limits are on this framing page. Text the street with the photos.
What ZIPs does this Antioch page cover?
94509 and 94531. Text the street with the photos so the bid matches the address inside the city.
Who issues the permit in Antioch?
The City of Antioch Building Services Division at 200 H Street, 2nd Floor City Hall, CA 94509.
How much does metal stud framing cost in Antioch?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Antioch Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099
